Dismantling Aquastar Easyii - Praher Plastics Aquastar Easy Bedienungsanleitung

Fitting and dismantling Aquastar EasyII
For dismantling the electronic drive off the valve a box spanner with a wrench size of 15mm is
needed. Or you can use the emergency handle.
Carry out Installation in reverse order (step 8 – 1). The Installation of the divice on a manual valve
is described on next page. Inspection glas (step 2) to be screwed stalwartly (4Nm – 8Nm) and
hexagon screw (step 4) to be screwed with a minimum torque of 10 Nm.
18 www.praher-plastics.com