Explosion Drawing Of Aquastar Easyii - Praher Plastics Aquastar Easy Bedienungsanleitung

Explosion drawing of Aquastar EasyII

1. Aquastar lid with foam rubber cord
2. Control board
3. Hexagon screw
4. Gear motor
5. Pump end switch
6. Aquastar body bottom
7. Cabel with Connector plug (only with option pressure sensor)
8. Pressure sensor (if the sensor is installed)
9. Valve plate set-up
10. V6ND valve 1 ½", 2"
www.praher-plastics.com 17