Flexible Induction Cooking Area - IKEA HÖGKLASSIG Montageanleitung

ENGLISH
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds 3700
W.
• The function decreases the power of the
other cooking zones connected to the
same phase.
• The power setting display of the reduced
zones changes between two levels.

Flexible induction cooking area

Warning! Refer to Safety
chapters.
Multi-Flexi mode
The flexible induction cooking area consists
of four sections. The sections can be
combined into two cooking zones with
different size, or into one large cooking area.
You choose the combination of the sections
by choosing the mode applicable to the size
of the cookware you want to use. There are
three modes: Multi-Flexi mode 2 + 2 sections
(activated automatically when you switch on
the hob), Multi-Flexi mode 3 + 1 sections and
Multi-Flexi mode 4 sections.
To set the power setting use two
left side power selectors.
Switching between the modes
To switch between the modes use symbol:
.
When you switch between the
modes the power setting is set
back to 0.
Diameter and position of the cookware
Choose the mode applicable to the size and
the shape of the cookware. The cookware
should cover the selected area as much as
possible. Place the cookware centrally on the
selected area!
Place the cookware with the bottom
diameter smaller than 160 mm centrally on a
single section.
15