IKEA HÖGKLASSIG Montageanleitung Seite 22

ENGLISH
Problem
The flexible induction cook‐
ing area does not heat up the
cookware.
comes on.
Possible cause
The cookware is in the wrong
position on the flexible induc‐
tion cooking area.
The diameter of the bottom
of the cookware is incorrect
for the activated function or
function mode.
Automatic Switch Off oper‐
ates.
Remedy
Place the cookware in the
correct position on the flexi‐
ble induction cooking area.
The position of the cookware
depends on the activated
function or function mode.
Refer to "Flexible induction
cooking area".
Use cookware with diameter
applicable to the activated
function or function mode.
Use cookware with diameter
smaller than 160 mm on a
single section of the flexible
induction cooking area.
Refer to "Flexible induction
cooking area".
Switch off the hob and switch
it on again.
22