Information; Safety Information; General Safety Information - TESTBOY TB 27 Analog Bedienungsanleitung

Information

Information

Safety information

WARNING
Sources of danger include for example, mechanical parts, which may cause serious
personal injury.
Objects are also at risk (e.g. damage to the instrument).
WARNING
An electric shock can result in death or serious personal injury and endanger the
function of objects (e.g. damage to the instrument).
WARNING
Never point the laser beam towards a person's eyes, either directly or indirectly via
a reflective surface. Laser radiation can cause irreparable damage to the eyes.
The laser beam must be deactivated when conducting measurements close to people.

General safety information

WARNING
Unauthorised modification and / or changes to the instrument are not permitted, for
reasons of safety and approval (CE). In order to ensure safe and reliable operation
using the instrument, you must always comply with the safety information, warnings
and the information contained in the section "Intended use".
WARNING
Comply with the following specifications before using the instrument:
Avoid operating the instrument near to electric welding equipment, induction
|
heaters or other electromagnetic fields.
The instrument must be allowed to adjust to the new ambient temperature for ap-
|
prox. 30 minutes before use after abrupt temperature fluctuations, in order to sta-
bilise the IR sensor.
Do not expose the instrument to high temperatures for a long period of time.
|
Avoid dusty and humid environments.
|
| Measuring instruments and their accessories are not toys, and must be kept out
of the reach of children!
When working in commercial facilities, comply at all times with the specifications
|
of the accident prevention regulations for electrical systems and equipment as
established by the employer's liability insurance association.
The parts or accessories of the device must only be changed or replaced in
|
agreement with the manufacturer or their representative.
A continuity test is not possible because the sound signal can be conducted via
|
the break point of the line.
12
®
Testboy TB 27 Analog