GPO Attache Bedienungsanleitung Seite 9

Vinyl Recording Mode
1. Connect the small DC jack into the DC-IN port on the rear
2. Connect the plug to a mains outlet and turn the power
3. Plug a blank USB drive into the USB slot.
4. Use the mode select button until the LED indicator shows
5. Place your chosen vinyl record onto the turntable and begin
6. Press the record button on the unit's control panel. The LED
7. Press the record button once to record the vinyl as a
RCA Audio Out
An RCA cable is included with your GPO Attaché. You can use
this cable to connect to external speakers using the AUX-OUT
socket on the rear of the unit.
GPO_Attaché_EU_Manual_MARCH_2017.indd 9
Downloaded from www.Manualslib.com
of the unit.
socket on.
that you have selected recording mode:
playback as described above.
light will now begin to flash.
continuous track. Press the record button twice to split the
tracks.
manuals search engine
9
06/03/2017 12:25