GPO Attache Bedienungsanleitung Seite 7

Turntable Mode
1. Connect the small DC jack into the DC-IN port on the rear
2. Connect the plug to a mains outlet and turn the power
3. Turn on the unit using the Power/Volume Control.
4. Use the mode select button until the LED indicator shows
5. Place your chosen vinyl record onto the turntable.
6. Set the correct speed (RPM) of your record using the RPM
7. Move the tone arm to the desired starting point on the
8. Auto-stop on, the turntable will start spinning when the arm
9. Adjust the volume to your preferred volume.
10. Auto-stop off, the turntable will start spinning as soon
GPO_Attaché_EU_Manual_MARCH_2017.indd 7
Downloaded from www.Manualslib.com
of the unit.
socket on.
that you have selected turntable mode:
Speed Control.
record. The turntable will now start to play.
is moved towards the record, when the last track is finished
the turntable will stop spinning.
the record play function is selected, when the last track
is finished the turntable will continue to spin until the unit
is switched off or until a different mode is selected, this
function is only required for certain 45 rpm records that are
pressed more towards the centre of the record.
manuals search engine
7
06/03/2017 12:25