Installation - Gaggenau 400 Serie Montageanleitung

1. Hold the fan on the wall.
Note the direction of the air conduction.
2. Mark the 4 mounting boreholes.
3. Drill the 4x 8 mm l mounting
boreholes.
Insert wall plugs and screw the fan to
the wall.
The fan is connected to the extractor
hood with the Z 5 m extension cable
enclosed with the extractor hood.
4. Connect the pipe from the fan to the
extractor hood and feed to the outside.
5. Connect the fan to the extractor hood
with the extension cable.
The additional cover on the plug
must always be attached and closed for
safety reasons.
min.
1m

Installation

Variable connection options:
7