Panasonic CF-VDM741U Bedienungsanleitung Seite 14

Using the Software
After installing DVD-RAM Driver, you can use a DVD-RAM disc.
For more information, refer to the Online Manual of DVD-RAM Driver (
Installing DVD-RAM Driver
1 Log on to Windows as an administrator.
2 Set "DVD Drive Utility Disc" (CF-51 series) or "Product Recovery DVD-ROM" (sup-
plied with the computer) (CF-74 series) in the drive.
E
[Utility Setup tool] screen will appear (allow some time for disc recognition).
When the setup program will not run automatically, input [x:\setuputil.exe]*
[Run] and click [OK].
1
* "x" is the drive letter. You can change the letter to suit your preference.
3 Click [DVD-RAM Software Setup].
4 Click [Driver and Formatter Setup].
5 At the welcome screen, click [Next].
6 The License Agreement screen appears. Carefully read the agreement, then click [Yes].
7 At [Choose Destination Location] screen, do not change the setting, and click [Next].
8 At [Select Program Folder] screen, do not change the setting, and click [Next].
9 At [Start Copying Files] screen, click [Next].
10 After installation, add a check mark for [Yes, I want to restart my computer now], then
click [Finish].
The computer will restart automatically.
NOTE
DVDForm can be used only when logging on with administrator authority. (
page 22)
To access the Online Manual
Click [start] - [All Programs] - [DVD-RAM] - [DVD-RAM Driver] - [Using DVD-RAM
disc].
14
DVD-RAM Driver
below).
1 in [start] -