Programming/Deleting Transmitters; Exit Select Mode - Selve commeo Timer BT Betriebsanleitung

SELVE commeo radio
7.2.2. Programming/deleting transmitters
To program or deprogram a transmitter, select the desired channel
and push the PROG button for 1 second. The status LED lights up
green to indicate that the transmitter has been programmed. A red
light means that the transmitter has been deprogrammed.
1 s
7.2.3. Exit SELECT mode
By pushing the SELECT button for 3 seconds again, you will
leave the SELECT mode. The LED of the commeo transmit-
ter will stop flashing and the transmitter is ready for the
normal operation.
3 s
When you do not leave the SELECT mode, the transmitter will ensure
the leaving of the SELECT mode after 2 minutes automatically so that
you can use the transmitter directly at a later time.
Status LED transmitter = green  t ransmitter
Status LED transmitter = red  transmitter
47
GB
programmed
deleted
GB