Reset Runtime; Reset - Selve commeo Timer BT Betriebsanleitung

Connection and operating types
5.6.2. Reset runtime
An already set runtime can be deleted at the commeo Timer BT
directly and can be reset.
The deletion of the set runtime can be done via the service mode of
the commeo Timer BT.
Operation
Push the STOP button for 6 seconds and release the button
after that time.
The commeo Timer BT shifts into the service mode, signalized
6 s
by a blue flashing of the status LED.
Push the STOP button again for 9 seconds and release the
button after that time to delete the runtime and to restart the
runtime setting. The status LED flashes orange and signalizes
9 s
the new setting of the runtime (see 5.6.1.).

5.6.3. Reset

The resetting of the commeo Timer BT into factory state can also
be done via the service mode of the commeo Timer BT.
Operation
Push the STOP button for 6 seconds and release the button
after that time.
The commeo Timer BT shifts into the service mode, signalized
6 s
by a blue flashing of the status LED.
Push the UP , DOWN and STOP button at the same time for
12 seconds to bring about the factory state. The status LED
signalizes the executed factory reset with a red status LED for
3 seconds, after that it will automatically shift into the runtime
12 s
setting.
41
GB
GB