Cleaning The Condenser - Nordcap SKF 7F GN 2/1 Bedienungsanweisung

To clean the direct expansion finned radiators (condenser and evaporator) use a vacuum
cleaner, compressed air or a brush with long bristles.
IMPORTANT! Do not use metal objects, sharp objects, blades or anything else that
may damage the appliance.
Warning! While cleaning, DO NOT remove the labels with the serial
numbers.
These labels provide important information on the appliance for technical
assistance.
In case of a long period of inactivity, it is advisable to:
1. Thoroughly clean the appliance both inside and out.
2. Protect the external surfaces with specific oil-based products for steel and leave
the door open slightly.
11.3

Cleaning the Condenser

Warning! Disconnect the power plug before cleaning the appliance.
For the proper and efficient operation of the condenser, it is necessary to keep it clean to
allow for the air to circulate freely.
It is advisable to perform this operation once every 30 days of normal use of the appliance.
Disconnect the appliance from the electrical power supply and clean the front protection
grid of the appliance using a vacuum cleaner (Fig. 11.1).
APPLIANCE
Rev. 01 of 01/07/2019
Translation of the original instructions in Italian
Cleaning the condenser
74
SOLL.
Fig. 11.1