Nordcap SKF 7F GN 2/1 Bedienungsanweisung Seite 61

APPLIANCE
Rev. 01 of 01/07/2019
Translation of the original instructions in Italian
Stop key Press to stop the cycle.
Save key Press to save the changes made
Press to go to the screen where the
Advanced key
different cycle phases can be set.
Confirm key Press to save the edited parameters.
OK key Press to confirm the data entered.
Press to cancel the set data and go
Cancel key
back to the previous screen.
Press to activate the cycle in the soft
Soft key version (key not present in the
Manual cycle).
Press to activate the cycle in the
Hard key hard version (key not present in the
Manual cycle).
60
SOLL.