Setting The Hourly Alarm; Setting The Time; Setting The Date; Technical Data - Ideen Welt EM2862 Bedienungsanleitung

SETTING THE HOURLY ALARM

Press the SET button (7). The time blinks and "AL" is displayed in the digital display (5).
Press the MODE button (8) until the bell symbol is displayed.
To confirm the selection, press the SET button (7) until the time is displayed again.
Now the scale will beep briefly at every full hour.
When you select the bell symbol and the alarm symbol together, then the scale beeps
at every full hour and you can set a separate alarm time as well (see SETTING THE
ALARM)

SETTING THE TIME

Press the SET button (7). The hour blinks.
Press the MODE button (8) to set the hour.
Press the SET button (7). The minutes blink.
Press the MODE button (8) to set the minutes.
To confirm the selection, press the SET button (7) until the time is displayed again.

SETTING THE DATE

Press the SET button (7) four times until the month is displayed.
Press the MODE button (8) to set the month.
Press the SET button (7). The day is displayed.
Press the MODE button (8) to set the day.
To confirm the selection, press the SET button (7) until the time is displayed again.

TECHNICAL DATA

Power supply:
If the end of the operating life has been reached, disable the appliance.
This device is suitable for private use only, and may not be used for
commercial purposes.
Imported by:
Dirk Rossmann GmbH
Isernhägener Straße 16
30938 Burgwedel
4 x AAA batteries

Environmental protection

Electrical and electronic devices should not be disposed of with
household garbage. If you want to dispose of this device,
contact local authorities about the correct method of waste
disposal.
6
t