Technical Data - Electrolux TWGL3E300 Benutzerinformation

Problem
Drying cycle
6)
too long
1) If there is an error message on the display (e.g. E51): Turn the tumble dryer off and on.
Select a new programme. Touch the Start/Pause button. If the appliance does not operate
contact the service centre and provide the error code.
2) Follow the programme description — see the PROGRAMMES chapter .
3) See the
4) Only dryers with the Dryness (Trockengrad) option.
5) See the HINTS AND TIPS chapter .
6) Note: After a maximum of 5 hours the drying cycle ends automatically.
11.1 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The humidity sensor is dirty.
• The drum is dirty.

12. TECHNICAL DATA

Height x Width x Depth
Max. depth with the appliance door open
Max. width with the appliance door open
Adjustable height
Drum volume
Maximum load volume
Voltage
Frequency
Sound power level
Total power
Possible cause
1)
The filter is clogged.
The load is too large.
The laundry was not spun suffi‐
ciently.
Too low or too high room tem‐
perature - this is not the appli‐
ance malfunction.
CARE AND CLEANING chapter.
Clean the filter.
Do not exceed the maximum
load size.
Spin the laundry well in the
washing machine.
Ensure a room temperature
higher than +5°C and lower than
+35°C. Optimal room tempera‐
ture to achieve best drying re‐
sults is between 19°-24°C.
• Inadequate default dryness level
settings. See chapter
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 19°-24°C.
850 x 596 x 638 mm (maximal 663 mm)
1108 mm
958 mm
850 mm (+ 15 mm - feet regulation)
118 l
8,0 kg
230 V
50 Hz
66 dB
900 W
ENGLISH
Remedy
Adjustment of
23