Display Operating Status; Technical Data; Digital Central Station; Piko Smartcontroller - PIKO SmartControl light Kurzanleitung

light
I. Display operating status
Red LED off - Green LED on
Red LED on - Green LED off
II. Technical data
a. Digital central station
• Power supply: Input: 240 V 50 Hz, Output: 15 V= / 2 A
• max. load main track output: 2 A
• max. load programming track output: 250 mA
• max. load LocoNet
b. PIKO SmartController
• LocoNet ® port
• Power consumption during normal LocoNet
III. Safety warnings
• Please read the safety warnings and this instruction manual before using the devices.
• Always treat your PIKO SmartControl
electronics; therefore, you should avoid exposing them to harsh impacts, moisture and
extreme temperatures.
• The devices are not toys and should not be handled by children under the age of 14.
• Never insert the connection cables into a power socket!
• Always check the power supply for damage to the cables, the plugs, the case or to other
parts. In case of any damage, discontinue use of the device!
System
Track current switched on
Track current switched off
(stop key pressed, short circuit or during active
Overheating
Undervoltage at the LocoNet
(Overload on the LocoNet
Digital central station currently in
LocoNet
®
-T: 500 mA
light
®
operation: 25 mA
devices with care! The devices contain sensitive
light
26
® T power supply
®
® programming mode