PIKO SmartControl light Kurzanleitung Seite 25

To make the selection of a loco easier, you can assign a symbol to each loco address (in our example
can use the up / down ([
[ .
By pressing
"LOCONAME". The position of the cursor can be changed by turning the throttle knob. Then, please
a number, you can use the respective number keys. The
If you press the throttle knob again, the selected number or letter is accepted and you can turn to the
pressing .
By pressing you can switch to the "CHANGE FUNC. ICON" menu.
Here you can assign symbols to every loco function from 0 to 24. Additionally, you can decide whether
If "MULTI" is activated you can press
By pressing the function symbol can be changed. You can select the symbol with the [
By pressing and using the [
Leave the sub-menu by pressing [0 .
to reach the sub-menu 2 „LOCOSYM.". Here, you
/ [
[
or [
[ .
23
key generates a blank space.
[ .
.
light
and [