Samsung NZ84T9747VK Montage- Und Gebrauchsanweisung Seite 61

To deactivate the function:
Note :this operation restores the hob settings to those prior to
the pause.
• press (5)
• within 10 seconds scroll to the right along the Selection bar
(8), relating to the cooking zone 2 (FIG.19);
Note : if the operation is not performed within this time
the pause function will remain active.
Note: if after 10 minutes, the Pause Function is not
deactivated, the hob will turn off automatically.
Recall
The Recall function allows to recover all the hob settings, in
case of accidental shut-down.
Activation:
• turn the hob back on
down
• press (5), within the next 6 seconds
Automatic Heat UP
The Automatic Heat UP function allows you to reach the set
power faster; with this function it is possible to cook food
faster, but without the risk of burning it, because the
temperature does not exceed the set level.
This function is available for the levels of power 1 -8 .
Activation:
• press and hold, on the Selection bar (8), the desired power
• a " " is displayed (I).
Power Limitation
The Power Limitation function allows the product to be used
while limiting its maximum absorption.
Note : the limit must be set when the hob is off, without
pressing (1), within 2 minutes from when the hob is
connected to the electrical network, or from when the
electrical network itself is reconnected.
To set the Power Limitation:
• press and hold keys
signal sounds
• slide along sliders FL and RL
at the same time, from left to right, and press down at the
letters P, until a short acoustic signal sounds, the Timer
display (A) shows the symbols
be set
the FL zone display shows the current setting**
0 = 7.4 KW
1 = 4.5 KW
** by default, the limit is set to 7.4 KW
• to change the Power Limitation setting slide on the FL
slider
from left to right to increase the Kw
(1) within 6 seconds after shut-
+ (4+5), until an acoustic
" "
CF6 , to indicate that it can
from right to left to decrease the Kw
• to save the selection, press the keys
for 1 second;
an acoustic signal will sound to confirm the setting and the
function will close.
USING THE EXTRACTOR FAN
Power-on
Press (touch) (1) hob/ extractor
The indicator light will turn on to indicate that the hob/extractor
is ready for use
Press again to turn off
Note: This function has priority over the others.
Switching on the extractor fan:
Touch (press) the Selection bar (6) to activate the extractor fan
Extraction speed (power):
Touch and scroll along the Selection bar (6):
• to the right to increase the speed (power) of the extractor fan
(0-10);
• to the left to decrease the speed (power) of the extractor fan
(10-0);
Timer
Activation/Regulation of Timer function for the extractor
fan
• Select the extractor fan (speed ≠ 0).
• Press (3+2) to access the Timer function (from
any speed)
• Regulate the duration of the Timer:
press the selector
time
press the selector
down time
the display (A) will show the countdown,
Note: on the side of the display of the extractor fan, with the
Timer in use, the following symbol will appear
When the timer has finished the countdown, there is an
acoustic signal (for 2 minutes, or it will stop when one of the
buttons on the hob is pressed), while the display (A) will flash,
with the symbol " .
To switch off the Timer:
select the cooking zone
set the value of the timer to " " , by means of
Note: the function remains active if no other key is pressed in
the meantime.
Filter saturation indicator
The hood indicates when filter maintenance is needed:
Grease filter
" "
the (C) LED lights up
Activated carbon odour filter
" "
the (C) LED flashes
61
(2), to increase the automatic shut-down
(3), to decrease the automatic shut-
".
+ (4+5),
(E)
(3),