Selecting Print Option (Aprt); Setting The Time (Time) - Seca 727 Bedienungsanleitung Und Garantieerklärung

Selecting print option

Setting the time (Time)

Downloaded from www.Manualslib.com
1. Switch on the device.
2. Select the "ASEnd" menu item from submenu "rF"
3. Select the setting "On" and confirm your selection.
You can configure the device so that measured results
are automatically printed out by a wireless printer regis-
(APrt)
tered to the wireless group.
1. Switch on the device.
2. Select the menu item "APrt" in the "rF" submenu
3. Select the appropriate setting for your combination
4. Confirm your selection.
You can configure the system so that the wireless
printer automatically adds the date and time to your
measured results. To do so, you have to set the date
and time once on the device and transmit this to the
wireless printer's internal clock.
1. Switch on the device.
2. Select the "tiME" menu item from the "rF" sub-
3. Confirm the selection.
manuals search engine
and confirm your selection.
You exit the menu automatically.
NOTE
This function is only accessible if the "Learn"
function has been used to integrate a
seca wireless printer in the wireless group.
and confirm your selection.
of devices:
– HI: measured results from length measuring
devices (not functional with this model)
– MA: measured results from scales
– HI_MA: measured results from length meas-
uring devices and scales (not functional with
this model)
– Off: no automatic printout, printout only if
Enter key is held down during weighing.
You exit the menu automatically.
NOTE
This function is only accessible if the "Learn"
function has been used to integrate a
seca wireless printer in the wireless group.
menu.
The current selection for "year" (YEA) is displayed.
The seca 360° wireless network • 71
English