GPO Bermuda Bedienungsanleitung Seite 9

1.Ensure that the unit is correctly unpacked and set up as
2. Place your chosen vinyl record onto your turntable
3. Set the correct speed (rpm) of your record (either 33rpm,
4. Turn the volume control knob on the front of the unit
5. Turn the control knob on the front of the unit so that Turnta-
6. Release the tone arm clip, move the tone arm to the desired
7. Adjust the speaker volume to the preferred level using the
8. Once the record has finished, the tone arm will automatically
GPO_Bermuda_EU_Manual.indd 9
Downloaded from www.Manualslib.com
Turntable Mode
described in the Unpacking section
45rpm or 78rpm)
clockwise to turn the unit on
ble mode is selected. This will be confirmed by a red
indicator light on the unit's side panel.
starting point on the record and lower the needle. Your
record will now start to play.
volume control knob.
lift and return to the rest position.
manuals search engine
9
14/09/2016 12:29