GPO Bermuda Bedienungsanleitung Seite 11

1. Turn the volume control knob on the front of the unit
2. Turn the control knob on the front of the unit so that Turnta-
3. Place a blank USB drive into the slot on the unit's side panel
4. Place the desired record onto the turntable, and play as
IN
r
5. Press the record button on the control panel to begin
e.
6. Press once to record the whole vinyl as one track, and press
You can connect extra speakers to the GPO Bermuda using the
RCA audio cable provided. The relevant Audio Out slots are
located on the rear of the unit.
r
GPO_Bermuda_EU_Manual.indd 11
Downloaded from www.Manualslib.com
Vinyl Record Mode
clockwise to turn the unit on
ble mode is selected. This will be confirmed by a red
indicator light on the unit's side panel.
RCA Audio Out
described in the Turntable Mode section
recording. The record light on the side panel will illuminate to
indicate that you are now recording.
twice to split the tracks.
RCA Audio Out
manuals search engine
11
14/09/2016 12:29