Liemke KEILER-25 LRF Bedienungsanleitung Seite 32

> Use the Up (4) / Down (3) buttons to move
the cursor to align its center with the position
indicated by the rangefinder. And with a short
press to move 1 pixel and long press to move
10 pixels each time.
> To exit and save the Ranging Cursor Calibra-
tion function, press and hold down the Menu
button (5).
> No operation within the 30 s will exit the
interface without saving data.
Defective Pixels Calibration
When using the device, defective (broken)
pixels may appear on the sensor: i.e., bright or
dark points of constant brightness that are visib-
le on the image. KEILER-25 LRF / KEILER-25 LRF
offer the possibility of removing any defective
pixels on the sensor, as well as to cancel any
deletion.
> Open the sub menu by pressing the Menu
button (5).
> Select the "Defective Pixels Calibration"
option
> Enter the Defective Pixels Calibration interface
with a short press of the Menu button (5).
> A white cross cursor will appear on the display.
> A 2x magnified image of the cross cursor area
> A tooltip will appear at the bottom of the
> The horizontal and vertical directional arrows
> A short press of the Menu button (5) switches
> Use the Up (4) / Down (3) buttons to move the
PRO
> After the cursor aligns with the defective pixel,
> Then, by moving the cursor across the display,
> Short press the Power button (6) again in the
KEILER – 25 LRF · Operating Manual 07 / 2020
(PIP) will appear on the lower-left corner of the
display that is required to facilitate a search
for the defective pixel and to align the marker
with it.
display, which displays the current number of
defective pixels calibrated, the moving direc-
and vertical
tion (horizontal
arrows) and the position of the cursor.
indicate to move the cursor with the coordi-
nates along the X and Y axes.
the cursor direction from the horizontal to the
vertical and vice versa. The icon and text will
be changed from white to blue when this
direction is activated.
cursor to align its center with the defective
pixel. And with short press to move 1 pixel and
long press to move 10 pixels each time.
delete the defective pixel with a short press of
the Power button (6).
you can delete the next defective pixel.
same position to undo the calibration.
E
N
directional
28
–
29