Laser Ranging Function - Liemke KEILER-25 LRF Bedienungsanleitung

12. LASER RANGING
FUNCTION

Laser Ranging Function

> Short press the Up / Ranging button (4) to switch
on the laser ranging function in the home screen.
> The laser cursor opens automatically, and the
tooltip at the bottom of the screen displays
the current ranging mode and the distance of the
target indicated by the cursor.
> There are two kinds of ranging modes:
single ranging and continuous ranging
Press and hold the Up / Ranging button (4) to
switch between the two modes.
> In single ranging mode, short press the
Up / Ranging button (4) is required for ranging.
> In the continuous ranging mode, the distance of
the target indicated by the cursor will be refreshed
automatically every 1 second, without any
keystroke operation.
> Ranging range and accuracy is 600 m±1m, and it
will be affected by fog and heavy rain and other
weather.
> After the distance measurement is completed,
short press the Power button (6) to exit the laser
ranging function.
.
NOTE!
The product implements an
invisible laser beam. Please pay
attention to the following:
– Do not point the laser at eyes
– Do not point the laser at people
– Do not look into the laser with optical
devices
– Remove your finger from the measu-
ring button when you are not mea-
suring. This will prevent accidental
activation of the laser.
– DO NOT disassemble, alter or repair
the binoculars yourself.
– The laser can be hazardous to your
health.
WARNING!
This product has been tested to
meet the following standards:
CLASS 1 LASER PRODUCT.
INVISIBLE LASER RADIATION.
NEVER LOOK WITH OPTICAL DEVICES
INTO THE LASER (BINOCULARS,
TELESCOPES).
This device complies with the regula-
tions for laser class 1 in accordance
with applicable standards
IEC 60825-1:2007 Edition 2 (TÜV SÜD,
EN 60825-1:2007 and CE according to
EN 61326-1:2013.
E
N
20
–
21