Liemke KEILER-25 LRF Bedienungsanleitung Seite 27

> Stop the video recording by pressing and holding
down the Down / Photo button (3).
> Video and picture files are stored in the built-in
memory card after video recording has been
turned off.
NOTE!
> You can enter and work on the menu
during video recording.
> When the video recording time
exceeds 1 hour, that is, the tooltip
shows 59:59, and the next second will
automatically jump to 00:01 to start
the counting of the next hour.
> The maximum duration of a video
recording file is five minutes. After this
time, the video will be recorded onto
a new file.
> The number of files is limited by the
capacity of the device's built-in me-
mory. Regularly monitor the amount
of free memory in the built-in memory
card, transferring footage and pho-
tographs to other media to free up
space on the memory card.
Memory Access
When the device is turned on and connected to
a computer, it is recognized by the computer as
a flash memory card, which is used to access the
device's memory and make copies of pictures and
videos.
> Turn on the device and connect it to the
computer through the USB cable.
> Double-click "my computer" on the desktop -
double-click to open the device named "Infiray"
- then click and open the device named
"Internal Storage"
memory.
> There are different folders named by time in
memory .
> Recorded videos and photographs are saved in
these folders in the format: IMG_HHMMSS_XXX.
jpg (for photos) and VID_HHMMSS_XXX.mp4 (for
video). HHMMSS- hour minute second; XXX -
three-digit common file counter (for photos and
video). The counter used in the naming of
multimedia files is NOT reset.
KEILER – 25 LRF · Operating Manual 07 / 2020
E
N
to access
18
–
19