Garmin GPS 152H Schnellstartanleitung Seite 5

3. Select New Waypoint.
4. Use the Rocker to highlight the coordinates field.
5. To change the default symbol, name, or depth of the waypoint,
use the Rocker to highlight the field you want to change and
enter the text.
6. Select OK to save the waypoint.
Creating a Waypoint While on the Map Page
1. From the Map page, use the
the location where you want to create a waypoint.
2. Press and hold Enter/Mark until the New Waypoint screen
appears.
3. To change the default symbol, name, or depth of the waypoint,
use the Rocker to highlight the field you want to change and
enter the text.
4. Select OK to save the waypoint.
Deleting a Waypoint
1. From any Main page, press Menu twice.
2. Highlight Wpt.
3. Highlight By Name or Nearest.
4. Select the waypoint you want to delete.
5. Select Delete > OK.
GPS 152H Quick Start Manual
Rocker to move the pointer ( ) to
Navigating to a Destination
To navigate from your present location to your destination, the
destination must first be stored as a waypoint.
To navigate to a waypoint:
1. From any of the Main pages, press NAV/MOB.
2. Select Go To Waypoint.
By Name or Nearest.
3. Highlight
4. Select the waypoint to which you want to navigate.
5. Select Go To. Use the Map page, the Compass page, the
Highway page, or the Numbers page to navigate to your
destination.
Creating a Route from a List of Waypoints
1. From any Main page, press Menu twice.
2. Highlight Rte, and press Menu.
3. Select New Route.
4. Select the first blank field in the list of waypoints.
5. Select a waypoint from the By Name
6. Select OK.
7. Continue to select waypoints until you have selected the last
point on the route.
8. Press Quit to save the route.
To begin navigating the route, press
list or the Nearest list.
NAV/MOB
and select the route.