Progress pag 6430 e Bedienungs- Und Installationsanleitung Seite 6

6
progress
Take care when frying food in hot
oil or fat, as the overheated
splashes could easily ignite.
When switching on the mains, after
installation or a power cut, it is quite
normal for the spark generator to be
activated automatically.
If the burner does not ignite, turn the
control knob to zero, and try again.
Do not keep the control knob
pressed for more than 15 seconds.
If the burner does not light even after 15
seconds, release the control knob, turn
it the "off" position and wait for at least
one minute before trying to light the
burner again.
If the burner accidentally goes out,
turn the control knob to the "off"
position and wait for at least 1
minute before trying to light the
burner again.