Herunterladen
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. Wiseup Anleitungen
  4. Überwachungskameras
  5. WIFI38
  6. Bedienungsanleitung

Wiseup WIFI38 Bedienungsanleitung

Vorschau ausblenden

Werbung

Quicklinks

Diese Anleitung herunterladen
I. Product Overview
1. Reset Button
2. Power Button
3. Micro SD Card Slot
4. USB Port
5. Battery Charging Indicator Light
6. WIFI Indicator Light
7. Power Indicator Light
8. Camera Lens
9. Infrared Leds
II. What's in the Package?
-1× Travelling Mug Camera
-1× USB Cable
-1× AC110-240V to DC 5V Power Adapter
-1× 16GB Micro SDHC Class 10 Card (already inserted into the Micro SD card slot)
Downloaded from
www.Manualslib.com
User Manual (IOS version)
2
1
3
4
5
7
6
manuals search engine
WIFI38
600ml
500ml
8
400ml
9
300ml
200ml
100ml

Werbung

loading

Verwandte Anleitungen für Wiseup WIFI38

Inhaltszusammenfassung für Wiseup WIFI38

  • Seite 1 WIFI38 User Manual (IOS version) I. Product Overview 600ml 500ml 400ml 300ml 200ml 100ml 1. Reset Button 2. Power Button 3. Micro SD Card Slot 4. USB Port 5. Battery Charging Indicator Light 6. WIFI Indicator Light 7. Power Indicator Light 8.
  • Seite 2 III. Preparation of Camera 3.1. Make sure that a micro SD card which has been formatted in advance has been inserted into the SD card slot of the camera. The internal memory of this SD card cannot exceed 64GB and we suggest you use the Micro SDHC Class 10 card only. 3.2 Connect the camera to an external power source, the power indicator light and the charging indicator light will be solid on and the camera will be turned on automatically.
  • Seite 3 4.2 Use IOS mobile device to scan the two-dimension code below, or directly search "Camwf " in the App Store to install the APP. 4.3 Open the WLAN settings page of the IOS mobile device and connect the IOS mobile device to the WIFI hotspot of camera.
  • Seite 4 AT&T 11:57 AM WLAN Settings Wi-Fi RT-FHC22NUK111A 4.4 Open the "Camwf " APP. AT&T 11:57 AM Camwf 4.5 Add the camera to the "Camwf " APP. Step 1. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 5 AT&T 11:57 AM Devices Devices Media Step 2. AT&T 11:57 AM Add Device Back LAN Search Devices Add Device By ID Step 3. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 6 AT&T 11:57 AM LAN search devices JP5DLXEVZGES11FZ111A Step 4. AT&T 11:57 AM Back Add Device Device Name IP Cam Device UID JP5DLXEVZGES11FZ111A admin User Name Password 4.6 If the status of the camera is "Connected", indicating that the P2P network mode(LAN mode) of the camera is configured successfully.
  • Seite 7 Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media <Note>: The effective connection distance between the camera WIFI hotspot and the IOS mobile device is approximately 15 meters (49 feet). V. Remote Network Configuration (WAN Mode) 5.1 Open the "Camwf " app and make sure that the camera has been successfully added to the app and is in the online condition.
  • Seite 8 5.2 Enter the camera menu and then select "Network Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 5.3 Enter "Network Settings" to search for the available WIFI hotspots, select the WIFI hotspot you want to connect.
  • Seite 9 automatically. AT&T 11:57 AM Network Settings Settings SSID: SSID-1 xxxxxxxx 5.5 Exit the "Camwf " APP. 5.6 Return to the WLAN settings page of the IOS mobile device and disconnect the camera from the current WIFI hotspot. AT&T 11:57 AM AT&T 11:57 AM AT&T...
  • Seite 10 AT&T 11:57 AM AT&T 11:57 AM WLAN WLAN Settings Settings WLAN WLAN SSID-2 SSID-2 AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM WLAN Settings Cellular Settings Settings Cellular Data WLAN WLAN Cellular Data Options Cellular 5.8 After make sure that your IOS mobile device has Internet access, open the "Camwf " APP again.
  • Seite 11 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf Devices Media <Note>: If the status of the camera is "Connect Fail", indicating that the remote network configuration failed, please re-configure the remote network. VI. Settings of Motion Detection Video Recording Mode 6.1 Open the "Camwf "...
  • Seite 12 6.2 Enter the camera menu and select "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 6.3 Select "Alarm Record" and then select the desired motion detection sensitivity under "Motion Detection".
  • Seite 13 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 14 7.2 Enter the camera menu and select "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 7.3 Select "24h Video" and turn off the "Motion Detection" function. AT&T 11:57 AM AT&T...
  • Seite 15 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 16 AT&T 11:57 AM Devices Camwf Connected Devices Media 8.3 Tap the video recording button to start video recording. AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.4 Tap the sound recording button to turn on/off the sound recording function. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 17 AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.5 Play the video files saved on the IOS mobile device. Step 1 AT&T 11:57 AM Devices Camwf Connected Devices Media Step 2 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 18 AT&T 11:57 AM Photos Camwf Camwf Devices Media Step 3 AT&T 11:57 AM Camwf Edit <Note>: The video resolution is 1280x720P and the video format is MP4. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 19 IX. Play the Camera SD Card Video Files on the IOS Mobile Device 9.1 Open the "Camwf " APP. AT&T 11:57 AM Camwf 9.2 Enter the camera menu and select "SDCard Record". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings...
  • Seite 20 9.3 Select one of the video files to play. AT&T 11:57 AM SDCard Full time recording 6 Now 2017 at 4:20 PM Full time recording 6 Now 2017 at 4:15 PM Full time recording 6 Now 2017 at 4:08 PM Full time recording 6 Now 2017 at 4:02 PM Full time recording...
  • Seite 21 XI. Change the Camera Name 11.1 Open the "Camwf " APP. AT&T 11:57 AM Camwf 11.2 Make sure that the camera has been successfully added to the app and is in the online condition. Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices...
  • Seite 22 11.3 Enter the camera menu and select "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 11.4. Input the new camera name. AT&T 11:57 AM User Settings Settings...
  • Seite 23 AT&T 11:57 AM User Settings Settings Device Name New name Device UID JP5DLXEVZGES11FZ111A User Name admin Password XII. Change the Camera's Login Password 12.1 Open the "Camwf " app and make sure that the camera has been successfully added to the app and is in the online condition. Camwf AT&T 11:57 AM...
  • Seite 24 12.2 Enter the camera menu and select "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 12.3 Input the new password. AT&T 11:57 AM AT&T 11:57 AM User Settings...
  • Seite 25 AT&T 11:57 AM User Settings Settings Device Name Camwf Device UID JP5DLXEVZGES11FZ111A User Name admin Password NEW PASSWORD Psaaword1 Password2 XIII. Back-up Battery Charging Connect your camera to an external power source to charge the battery, the power indicator light and the charging indicator light will be solid on at the same time during the charging process.
  • Seite 26 Frequently Asked Questions: Q: Why I cannot find the camera’s WIFI hotspot on my IOS mobile device? A: Please try one of the following methods to solve the problem: 1. Connect the camera to an external power source with the power adapter. 2.
  • Seite 27 Q: Can I connect the camera to my Windows PC? A: Yes, you can, but you need to use an IOS mobile device to add the camera on the APP in the first place, then add the camera on the PC client software. The PC client software download address is: http://www.mymitech.com/download.html Downloaded from www.Manualslib.com...
  • Seite 28 WIFI38 Bedienungsanleitung (IOS) I.Produktbeschreibung 600ml 500ml 400ml 300ml 200ml 100ml 1. Reset-Taste 2. Netzschalter-Taste 3. Micro SD-Kartensteckplatz 4. USB-Anschluss 5. Ladeanzeige 6. WIFI-Indikator 7. Stromanzeige 8. Kameralinse 9. Infrarotlicht II.Was istim Packet enthalten -1× Reisebecher-Kamera -1× USB-Kabel -1× AC110-240VzuDC 5VNetzteil-Adaptor -1×...

  • Seite 29: Kameravorbereiten

    III. Kameravorbereiten 3.1 Versichern Sie bitte, dass eine Mini-SD-Karte in den SD-Kartensteckplatz der Kamera eingesetzt wird und dass die Karte zuvor formatiert wurde. Die maximale Speicherung der eingelegten SD-Kartedarf nicht 64 GBüberschreiten. Wir empfehlen Sie daher, nur Micro SDHC Class 10 Micro SD-Karten zu verwenden. 3.2 Schließen Sie die Kamera an eine externe Stromquelle an.
  • Seite 30 für 3 Sekunden lang, um die Kamera einzuschalten. Wenn die WIFI-Anzeige langsam blinkt, bedeutet dies, dass der WIFI-Hotspot der Kamera eingeschaltet und funktionsbereit ist. 4.2 Verwenden Sie IOS-Mobilgeräte, um den QR-Code unten zu scannen, oder suchen Sie im App Store nach "Camwf ", um APP zu installieren. 4.3 Öffnen Sie die WLAN-Einstellungsseite des IOS-Mobilgeräts und verbinden Sie das IOS-Mobilgerät mit dem WIFI-Hotspot der Kamera.
  • Seite 31 AT&T 11:57 AM WLAN Settings Wi-Fi RT-FHC22NUK111A 4.4 Öffnen Sie das APP "Camwf ". AT&T 11:57 AM Camwf 4.5 Fügen Sie Ihre Kamera zum "Camwf " hinzu. 1.Schritt Downloaded from www.Manualslib.com manuals search engine...
  • Seite 32 AT&T 11:57 AM Devices Devices Media 2. Schritt AT&T 11:57 AM Add Device Back LAN Search Devices Add Device By ID 3.Schritt Downloaded from www.Manualslib.com manuals search engine...
  • Seite 33 AT&T 11:57 AM LAN search devices JP5DLXEVZGES11FZ111A 4.Schritt AT&T 11:57 AM Back Add Device Device Name IP Cam Device UID JP5DLXEVZGES11FZ111A admin User Name Password 4.6 Wenn der Status der Kamera als "Connected" angezeigt wird, ist der Peer-to-Peer-Netzwerkmodus (LAN-Modus) der Kamera erfolgreich konfiguriert. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 34 Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media <Hinweis>: Die effektive Verbindungsdistanz des WIFI-Hotspots der Kamera beträgt etwa 15 Meter (49 Fuß). V. Entfernt-Netzwerkmodus-Konfiguration (WAN-Modus) 5.1 Öffnen Sie das App "Camwf " und versichern Sie bitte, dass die Kamera erfolgreich zum App hinzugefügt wurde und online ist.
  • Seite 35 5.2 Rufen Sie das Kameramenü auf und wählen Sie "Network Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 5.3 Bitte geben Sie "Netzwerkeinstellungen" ein und suchen Sie nach verfügbaren WIFI-Hotspots.
  • Seite 36 wird dann automatisch neu gestartet. AT&T 11:57 AM Network Settings Settings SSID: SSID-1 xxxxxxxx 5.5 Fahren Sie das App "Camwf " herunter. 5.6 Kehren Sie zur WIFI-Einstellungsseite auf IOS-Mobilgeräts zurück und trennen Sie die Verbindung zum aktuellen WIFI-Hotspot. AT&T 11:57 AM AT&T 11:57 AM AT&T...
  • Seite 37 AT&T 11:57 AM AT&T 11:57 AM WLAN WLAN Settings Settings WLAN WLAN SSID-2 SSID-2 AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM WLAN Settings Cellular Settings Settings Cellular Data WLAN WLAN Cellular Data Options Cellular 5.8 Nachdem Sie sichergestellt haben, dass Ihr IOS-Mobilgeräts über einen Internetzugang verfügt, öffnen Sie das App "Camwf "...
  • Seite 38 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf Devices Media <Hinweis>: Wenn der Status der Kamera "Connect Fail" anzeigt, schlägt die Konfiguration des Entfernt-Netzwerkmodus fehl. Konfigurieren Sie das Entfernt-Netzwerk erneut. VI. Einstellung des Aufnahmemodus für Bewegungserkennung 6.1 Öffnen Sie das App "Camwf "...
  • Seite 39 6.2 Rufen Sie das Kameramenü auf und wählen Sie "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 6.3 Wählen Sie "Alarm Record" und wählen Sie die gewünschte Bewegungserkennungsempfindlichkeit in "Motion Detection".
  • Seite 40 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 41 7.2 Rufen Sie das Kameramenü auf und wählen Sie "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Settings Back Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 7.3 Wählen Sie "24h Video" und deaktivieren Sie die Funktion "Motion Detection". AT&T 11:57 AM AT&T...
  • Seite 42 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 43 AT&T 11:57 AM Devices Camwf Connected Devices Media 8.3 Klicken Sie auf die Aufnahmetaste, um die Aufnahme zu starten. AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.4 Klicken Sie auf die Aufnahmetaste, um die Aufnahmefunktion ein- oder auszuschalten. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 44 AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.5 Sie können Videodateien wiedergeben, die auf IOS-Mobilgeräten gespeichert sind. 1.Schritt AT&T 11:57 AM Devices Camwf Connected Devices Media 2.Schritt Downloaded from www.Manualslib.com manuals search engine...
  • Seite 45 AT&T 11:57 AM Photos Camwf Camwf Devices Media 3.Schritt AT&T 11:57 AM Camwf Edit <Hinweis>: Die Video-Auflösung von ist 1280x720P, das Video-Format ist MP4. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 46 IX. Wiedergabe lokaler Videos auf einem IOS-Mobilgerät 9.1 Öffnen Sie das App "Camwf ". AT&T 11:57 AM Camwf 9.2 Rufen Sie das Kameramenü auf und wählen Sie "SDCard Record". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings...
  • Seite 47 9.3 Wählen Sie eine der Videodateien aus,um wiederzugeben. AT&T 11:57 AM SDCard Full time recording 6 Now 2017 at 4:20 PM Full time recording 6 Now 2017 at 4:15 PM Full time recording 6 Now 2017 at 4:08 PM Full time recording 6 Now 2017 at 4:02 PM Full time recording 6 Now 2017 at 3:57 PM...
  • Seite 48 XI. Ändern Sie den Kameranamen 11.1 Öffnen Sie das App "Camwf ". AT&T 11:57 AM Camwf 11.2 Versichern Sie, dass die Kamera erfolgreich zum App hinzugefügt wird und onlineist. Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media Downloaded from www.Manualslib.com manuals search engine...
  • Seite 49 11.3 Rufen Sie das Kameramenü auf und wählen Sie "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 11.4 Geben Sie einen neuen Kameranamen ein. AT&T 11:57 AM User Settings...
  • Seite 50 AT&T 11:57 AM User Settings Settings Device Name New name Device UID JP5DLXEVZGES11FZ111A User Name admin Password XII Änderung des Login-Passwortes der Kamera 12.1 Öffnen Sie das App "Camwf ". Versichern Sie, dass die Kamera erfolgreich zum App hinzugefügt wird und online ist. Camwf AT&T 11:57 AM...
  • Seite 51 12.2 Rufen Sie das Kameramenü auf und wählen Sie "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 12.3 Geben Sie das neue Passwort ein. AT&T 11:57 AM AT&T...
  • Seite 52 AT&T 11:57 AM User Settings Settings Device Name Camwf Device UID JP5DLXEVZGES11FZ111A User Name admin Password NEW PASSWORD Psaaword1 Password2 XIII. Aufladen der Ersatzakku Schließen Sie die Kamera an eine externe Stromquelle an. Während des Ladevorgangs sind die Strom- und Ladelanzeigen immer eingeschaltet. Wenn die Ladezeit 6 Stunden erreicht, schalten Sie bitte die Kamera aus.
  • Seite 53 Häufig gestellte Fragen: F: Der WIFI-Hotspot der Kamera kann nicht auf der WIFI-Einstellungsseite des IOS-Mobilgeräts gefunden werden. A: Bitte versuchen Sie die folgenden Lösungen. 1. Schließen Sie die Kamera an eine externe Stromquelle an. 2. Reset. 3.Überprüfen Sie die Entfernung zwischen dem IOS-Mobilgerät und der Kamera und warten Sie 2 Minuten lang, bis die WIFI-Einstellungsseite des IOS-Mobilgeräts innerhalb der effektiven WIFI-Verbindungsdistanz der Kamera aktualisiert ist.
  • Seite 54 F: Wie viele Kameras kann ich meinem App hinzufügen? A: EsgibtkeineBeschränkung. F: Kann ich meine Kamera an einen Windows-PC anschließen? A: Ja, aber Sie müssen im Voraus eine Kamera zu Ihrem mobilen Gerät hinzufügen und dann die kostenlose PC-Software auf Ihrem Computer installieren, um eine Kamera hinzuzufügen.
  • Seite 55 WIFI38 Manueld’emploi (IOS version) I.A Propos du Produit 600ml 500ml 400ml 300ml 200ml 100ml 1. Bouton de réinitialisation 2. Boutond' interrupteurd' alimentation 3. Fente pour carte Micro SD 4. USB port 5. Indicateur de charge 6. Indicateur de WIFI 7. Indicateur de puissance 8.
  • Seite 56 III. Préparez-vous pour la Caméra 3.1 Assurez-vous qu'il y a une mini carte SD insérée dans la fente pour carte SD de la caméra et que la carte a été préalablement formatée. La quantité maximale de mémoire insérée dans la carte SD ne peut pas dépasser 64 Go, et il est recommandé d'utiliser uniquement une carte Micro SDHC Class 10 SD.
  • Seite 57 4.2 Scannez le code QR ci-dessous avec l'appareil mobile IOS, ou recherchez "Camwf " directement dans App Store, pour installer APP. 4.3 Ouvrez la page des paramètres WLANsur l’appareil mobile IOS, pour connecter l’appareil mobile IOS au point d'accès WIFI de la caméra. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 58 AT&T 11:57 AM WLAN Settings Wi-Fi RT-FHC22NUK111A 4.4 Activez l'APP "Camwf ". AT&T 11:57 AM Camwf 4.5 Ajoutez votre Caméravidéo à l'APP "Camwf ". Étape 1 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 59 AT&T 11:57 AM Devices Devices Media Étape 2 AT&T 11:57 AM Add Device Back LAN Search Devices Add Device By ID Étape 3 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 60 AT&T 11:57 AM LAN search devices JP5DLXEVZGES11FZ111A Étape 4 AT&T 11:57 AM Back Add Device Device Name IP Cam Device UID JP5DLXEVZGES11FZ111A admin User Name Password 4.6 Si la caméra est en état d’ "Connected", il indique que le mode réseau point à point de la caméra est configuré...
  • Seite 61 Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media <Remarque>: La distance effective de connexion du point d’accès Wi-Fi de la caméra et les appareils mobiles IOS est d'environ 15 mètres (49 pieds). V. Configuration du Mode Réseau à Distance (WAN mode) 5.1 Activez l'APP "Camwf "...
  • Seite 62 5.2 Entrez dans le menu de la caméra et sélectionnez "Network Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 5.3 Entrez dans "Network Settings" pour chercher les points d'accès Wi-Fi disponibles et sélectionnez le point d'accès WIFI souhaité.
  • Seite 63 automatiquement. AT&T 11:57 AM Network Settings Settings SSID: SSID-1 xxxxxxxx 5.5 Quittez l’APP "Camwf ". 5.6 Retournez à la page des paramètres WIFI sur l’appareil mobile IOS et déconnectez-vous du point d’accès WIFI actuel. AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM AT&T...
  • Seite 64 AT&T 11:57 AM AT&T 11:57 AM WLAN WLAN Settings Settings WLAN WLAN SSID-2 SSID-2 AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM WLAN Settings Cellular Settings Settings Cellular Data WLAN WLAN Cellular Data Options Cellular 5.8 Assurez-vous que votre l’appareil mobile IOS a un accès Internet, ensuite, activez à nouveau "Camwf "...
  • Seite 65 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf Devices Media <Remarque>: Si la caméra est en état de "Connect Fail", cela signifie que la configuration du mode réseau distant a échoué. Veuillez reconfigurer le réseau distant. VI.
  • Seite 66 6.2 Entrez dans le menu de la caméra pour sélectionner "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Settings Back Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 6.3 Sélectionnez "Alarm Record", puis sélectionnez la sensibilité de détection de mouvement souhaitée dans "Motion Detection".
  • Seite 67 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 68 7.2 Entrez dans le menu de la caméra, et sélectionnez "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 7.3 Sélectionnez “24h Video”et désactivez la fonction de "Motion Detection". AT&T 11:57 AM AT&T...
  • Seite 69 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 70 8.2 Touchez la caméra. AT&T 11:57 AM Devices Camwf Connected Devices Media 8.3 Touchez le bouton d'enregistrement pour enregistrer. AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.4 Touchez sur le bouton d'enregistrement, vous pouvez activer ou désactiver. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 71 AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.5 Jouer les fichiersvidéo stockésur l’appareil mobile IOS. Étape1 AT&T 11:57 AM Devices Camwf Connected Devices Media Étape2 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 72 AT&T 11:57 AM Photos Camwf Camwf Devices Media Étape3 AT&T 11:57 AM Camwf Edit <Remarque>: la résolution vidéo de 1280x720P, et le format vidéo est MP4. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 73 IX. Jouez les Fichiers Vidéo Locaux sur l’Appareil Mobile Android 9.1 Activez l’APP. AT&T 11:57 AM Camwf 9.2 Entrez dans le menu de la caméra et sélectionnez "SDCard Record". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings...
  • Seite 74 9.3 Choisissez l'un des fichiers vidéo à jouer. AT&T 11:57 AM SDCard Full time recording 6 Now 2017 at 4:20 PM Full time recording 6 Now 2017 at 4:15 PM Full time recording 6 Now 2017 at 4:08 PM Full time recording 6 Now 2017 at 4:02 PM Full time recording 6 Now 2017 at 3:57 PM...
  • Seite 75 XI. Changer le Nom de la Caméra 11.1 Activez l’APP "Camwf ". AT&T 11:57 AM Camwf 11.2 Assurez-vous que la caméra a bien été ajoutée à l’APP et qu'elle est Online. Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media Downloaded from www.Manualslib.com...
  • Seite 76 11.3 Entrez dans le menu de la caméra et sélectionnez "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 11.4 Entrez un nouveau nom de caméra. AT&T 11:57 AM User Settings...
  • Seite 77 AT&T 11:57 AM User Settings Settings Device Name New name Device UID JP5DLXEVZGES11FZ111A admin User Name Password XII. Modifier le mot de Passe de Connexion de la Caméra 12.1 Activez l’APP "Camwf " pour vous assurer que la caméra a bien été ajoutée à l’APP et qu'elle est Online.
  • Seite 78 12.2 Entrez dans le menu de la caméra, et sélectionnez "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 12.3 Entrez un nouveau mot de passe. AT&T 11:57 AM AT&T...
  • Seite 79 AT&T 11:57 AM User Settings Settings Device Name Camwf Device UID JP5DLXEVZGES11FZ111A User Name admin Password NEW PASSWORD Psaaword1 Password2 XIII. Charger la Batterie de Réserve Connectez la caméra à une source d'alimentation externe. Lors du chargement, les voyants d'alimentation et de charge seront allumés en permanence. Lorsque la durée de charge atteint 6 heures, il faut éteindre la caméra.
  • Seite 80 Problèmescommuns: Q: Il est impossible de trouver le point d’accès WIFI de la caméra sur la page des paramètres WIFI de l’appareil mobile IOS. 1. Veuillez utiliser une alimentation externe pour alimenter la caméra. 2. Veuillez réinitialiserla caméra. 3. Vérifiez la distance entre l’appareil mobile IOS. et la caméra pour vous assurer que l’appareil mobile IOS est dans la distance de connexion efficace de points d'accès WIFI de la caméra, patientez 2 minutes, pour actualiser la page des paramètres WIFI pour l'appareil mobile IOS.
  • Seite 81 A: Pas de limite Q: Puis-je connecter ma caméra à un PC Windows? A: Oui, cependant, il faut d'abord ajouter une caméra sur l'appareil mobile, et puis ajouter un caméra gratuit sur votre PC pour installer le logiciel gratuit à partir du côté PC. Lien de téléchargement du logiciel client PC: http://www.mymitech.com/download.html.
  • Seite 82 WIFI38 Istruzione (Versione IOS) I. Panoramica del Prodotto 600ml 500ml 400ml 300ml 200ml 100ml 1. Tasto di reset 2. Tasto di accensione 3. Slot per scheda Micro SD 4. Porta USB 5. Indicatore di carica 6. Indicatore di WIFI 7. Indicatore di alimentazione 8.
  • Seite 83 scheda Micro SD) III. Prepara la Videocamera 3.1 Si prega di assicurarsi che una scheda mini SD sia stata inserita nello slot della scheda SD della videocamera e questa scheda sia stata formattata in anticipo. La scheda SD massima non deve superare i 64 GB, e ti consigliamo di usare solo la scheda Micro SDHC Classe 10 Micro SD.
  • Seite 84 IV. Configurazione della Modalità di Rete Punto a Punto (Modalità di LAN) 4.1 Collegare la videocamera a un alimentatore esterno o premere a lungo il tasto di accensione per 3s per accendere la videocamera. Quando vedi l'indicatore WIFI che cambia a lampeggiare lento, significa che l'hotspot WIFI della videocamera è stata accesa e pronta.
  • Seite 85 AT&T 11:57 AM WLAN Settings Wi-Fi RT-FHC22NUK111A 4.4 Accende APP "Camwf ". AT&T 11:57 AM Camwf 4.5 Aggiungi la videocamera all'APP "Camwf ". Fase 1. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 86 AT&T 11:57 AM Devices Devices Media Fase 2. AT&T 11:57 AM Add Device Back LAN Search Devices Add Device By ID Fase 3. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 87 AT&T 11:57 AM LAN search devices JP5DLXEVZGES11FZ111A Fase 4. AT&T 11:57 AM Back Add Device Device Name IP Cam Device UID JP5DLXEVZGES11FZ111A admin User Name Password 4.6 Se lo stato della telecamera viene visualizzato come "Connected", la modalità di rete punto a punto della videocamera (modalità...
  • Seite 88 Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media <Nota>: La distanza effettiva di collegamento tra l'hotspot Wi-Fi della videocamera e i dispositivi mobili IOS è di circa 15 metri (49 piedi). V. Configurazione della Modalità di Rete Remota ( Modalità di WAN) 5.1 Accende APP "Camwf ", assicurarsi che la videocamera sia stata aggiunta con successo ad APP e in linea.
  • Seite 89 5.2 Entrare al menu della videocamera, e poi selezionare "Network Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 5.3 Entrare "Network Settings" per cercare gli hotspot WIFI disponibili, e poi selezionare l'hotspot Wi-Fi a cui vuoi connetterti.
  • Seite 90 riavvierà automaticamente. AT&T 11:57 AM Network Settings Settings SSID: SSID-1 xxxxxxxx 5.5 Uscire da APP "Camwf ". 5.6 Torna alla pagina delle impostazioni WIFI sui dispositivi mobili IOS e poi disconnettiti dall'attuale hotspot WIFI. AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM AT&T...
  • Seite 91 AT&T 11:57 AM AT&T 11:57 AM WLAN WLAN Settings Settings WLAN WLAN SSID-2 SSID-2 AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM WLAN Settings Cellular Settings Settings Cellular Data WLAN WLAN Cellular Data Options Cellular 5.8 Assicurati che il tuo dispositivo mobile IOS possa accedere a Internet, e poi accende nuovamente APP "Camwf ".
  • Seite 92 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf Devices Media <Nota>: Se lo stato della videocamera mostra "Connect Fail", la configurazione della modalità di rete remota ha esito negativo. Si prega di riconfigurare la configurazione di rete remota. VI.
  • Seite 93 6.2 Entrare al menu della videocamera, e poi selezionare "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Settings Back Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 6.3 Selezionare "Alarm Record", e poi selezionare la sensibilità di rilevamento del movimento desiderata in "Motion Detection".
  • Seite 94 scheda Mini SD della viedeocamera. AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle...
  • Seite 95 7.2 Entrare al menu della videocamera, e poi selezionare "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 7.3 Selezionare "24h Video", e poi spegnere la funzione "Motion Detection". AT&T 11:57 AM AT&T...
  • Seite 96 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 97 8.2 Toccare la videocamera. AT&T 11:57 AM Devices Camwf Connected Devices Media 8.3 Toccare il tasto di video per avviare il video. AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset Downloaded from www.Manualslib.com manuals search engine...
  • Seite 98 8.4 Premere il tasto di registrazione per accendere o spegnere la funzione di registrazione. AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.5 Riproduce file video archiviati sul dispositivo mobile IOS. Fase1 AT&T 11:57 AM Devices Camwf...
  • Seite 99 Fase2 AT&T 11:57 AM Photos Camwf Camwf Devices Media Fase3 AT&T 11:57 AM Camwf Edit <Nota>: La risoluzione video del dispositivo mobile IOS 1280x720P, e il formato video è MP4. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 100 IX. Riproduci File Video Locali sul Dispositivo Mobile Android 9.1 Accende APP "Camwf ". AT&T 11:57 AM Camwf 9.2 Entrare al menu della videocamera, e poi selezionare "SDCard Record". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings...
  • Seite 101 9.3 Seleziona uno dei file video per la riproduzione. AT&T 11:57 AM SDCard Full time recording 6 Now 2017 at 4:20 PM Full time recording 6 Now 2017 at 4:15 PM Full time recording 6 Now 2017 at 4:08 PM Full time recording 6 Now 2017 at 4:02 PM Full time recording...
  • Seite 102 XI Cambia il Nome della Videocamera 11.1 Accende APP "Camwf ". AT&T 11:57 AM Camwf 11.2 Assicurarsi che la videocamera sia stata aggiunta con successo ad APP e in linea. Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media Downloaded from www.Manualslib.com manuals search engine...
  • Seite 103 11.3 Entrare al menu della videocamera, e poi selezionare "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 11.4 Inserisci un nuovo nome della videocamera. AT&T 11:57 AM User Settings...
  • Seite 104 AT&T 11:57 AM User Settings Settings Device Name New name Device UID JP5DLXEVZGES11FZ111A User Name admin Password XII. Cambia la Parola d'Ordine di Accesso della Videocamera 12.1 Accende APP "Camwf ", assicurarsi che la videocamera sia stata aggiunta con successo ad APP e in linea.
  • Seite 105 12.2 Entrare al menu della videocamera, e poi selezionare "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 12.3 Inserire una nuova parola d’ordine. AT&T 11:57 AM AT&T...
  • Seite 106 AT&T 11:57 AM User Settings Settings Device Name Camwf Device UID JP5DLXEVZGES11FZ111A User Name admin Password NEW PASSWORD Psaaword1 Password2 XIII. Ricarica per la Batteria di Backup Collega la videocamera a un alimentatore esterno. Durante la ricarica, l'indicatore di alimentazione e l'indicatore di carica continueranno a brillare. Quando il tempo di ricarica è di 6 ore, si prega di scollegare la videocamera dall'alimentazione esterna.
  • Seite 107 Domande Frequenti: D: L'hotspot WIFI della videocamera non può essere trovato nella pagina della impostazione WIFI del dispositivo mobile IOS. R: Si prega di provare la seguente soluzione. 1.Alimentando la videocamera con un alimentatore esterno. 2.Si prega di ripristinare la videocamera. 3.Si prega di verificare la distanza tra dispositivo mobile IOS e videocamera per garantire l'effettiva distanza di connessione del dispositivo mobile IOS nell'hotspot WIFI della videocamera, aspettare 2 minuti, aggiornare la pagina della impostazione WIFI del...
  • Seite 108 per connettersi con le videocamere. D: Quante videocamere possono essere aggiunte all'APP? R: Non c'è un limite D: Posso collegare la videocamera al personal computer Windows? R: Sì, ma devi aggiungere prima la videocamere al dispositivo mobile, e poi installare il software PC gratuito sul computer per aggiungere la videocamere.Link per scaricare il software cliente per PC: http://www.mymitech.com/download.html Downloaded from...
  • Seite 109 WIFI38 Guía de Usuario（Versión IOS） I. Descripción del Producto 600ml 500ml 400ml 300ml 200ml 100ml 1. Botón de Reseteo 2. Botón de Encendido 3. Ranura para Tarjeta SD Micro 4. Puerto USB 5. Luz Indicadora de Carga 6. Luz Indicadora de WIFI 7.
  • Seite 110 SD Micro） III. Prepare la Cámara Bien 3.1 Asegúrese de que se haya insertado en la ranura para tarjeta SD, y esta tarjeta se ha formateado previamente. La memoria máxima de la tarjeta SD insertado es no más de 64GB, y le sugeremos sólo usar la tarjeta SD Micro SDHC Clase 10. 3.2 Conecte la cámara a una fuente de alimentación externa, la luz indicadora de energía y la luz indicadora de carga se iluminarán al mismo tiempo, la cámara encenderá...
  • Seite 111 IV. Configuración de Modo Red P2P(Modo LAN) 4.1 Conecte la cámara a una fuente de alimentación externa, o mantenga pulsando el Botón de Encendido durante 3 segundos para encender la cámara. Cuando ve que la luz indicadora de WIFI parpadea lentamente, significa que el hotspot WIFI de la cámara está encendido y listo.
  • Seite 112 AT&T 11:57 AM WLAN Settings Wi-Fi RT-FHC22NUK111A 4.4 Abra la aplicación "Camwf ". AT&T 11:57 AM Camwf 4.5 Añada la cámara a la aplicación "Camwf ". Paso 1. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 113 AT&T 11:57 AM Devices Devices Media Paso 2 AT&T 11:57 AM Add Device Back LAN Search Devices Add Device By ID Paso 3 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 114 AT&T 11:57 AM LAN search devices JP5DLXEVZGES11FZ111A Paso 4 AT&T 11:57 AM Back Add Device Device Name IP Cam Device UID JP5DLXEVZGES11FZ111A admin User Name Password 4.6 Si el estado de la cámara se muestra "Connected", significa que el modo de red P2P de la cámara (modo LAN) se configura exitosamente.
  • Seite 115 Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media <Nota>: La distancia de conexión efectiva del hotspot WIFI de la cámara Con el dispositivo móvil IOS es unos 15 metros(49 pies) V. Configuración de Modo de Red Remota( Modo WAN) 5.1 Abra la aplicación "Camwf ", asegúrese de que la cámara se haya añadido exitosamente a la aplicación y esté...
  • Seite 116 5.2 Vaya al menú de cámara, despúes seleccione "Network Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 5.3 Entre en "Network Settings", busque el punto de acceso de WIFI disponible, seleccione el WIFI deseado.
  • Seite 117 automáticamente. AT&T 11:57 AM Network Settings Settings SSID: SSID-1 xxxxxxxx 5.5 Salga de la aplicación "Camwf ". 5.6 Vuelva a la página de configuración de WIFI del dispositivo móvil de IOS, desconéctese del hotspot WIFI actual. AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM...
  • Seite 118 AT&T 11:57 AM AT&T 11:57 AM WLAN WLAN Settings Settings WLAN WLAN SSID-2 SSID-2 AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM WLAN Settings Cellular Settings Settings Cellular Data WLAN WLAN Cellular Data Options Cellular 5.8 Después de asegurarse de que su dispositivo móvil IOS tenga acceso a Internet, abra nuevamente la aplicación "Camwf ".
  • Seite 119 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf Devices Media <Nota>: si el estado de la cámara se muestra "Connect Fail", significa que la configuración del modo de red remota es falla. Por favor configure la red remota nuevamente. VI.
  • Seite 120 6.2 Vaya al menú de la cámara, seleccione "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 6.3 Seleccione "Alarm Record" y luego seleccione la sensibilidad de detección de movimiento deseada en "Motion Detection".
  • Seite 121 en la tarjeta SD Micro de la cámara. AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection...
  • Seite 122 7.2 Vaya al menú de la cámara, seleccione "Device Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Settings Back Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 7.3 Seleccione "24h Video", luego apague la función de "Motion Detection". AT&T 11:57 AM AT&T...
  • Seite 123 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 124 8.2 Toque la cámara. AT&T 11:57 AM Devices Camwf Connected Devices Media 8.3 Toque el botón de grabación de vídeo para comenzar a grabar vídeo. AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.4 Haga clic en el botón de grabación, puede activar o desactivar la función de grabación.
  • Seite 125 AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.5 Se juega los archivos de vídeo guardados en el dispositivo móvil de IOS. Paso1 AT&T 11:57 AM Devices Camwf Connected Devices Media Paso2 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 126 AT&T 11:57 AM Photos Camwf Camwf Devices Media Paso3 AT&T 11:57 AM Camwf Edit <Nota>: La resolución de video en el dispositivo móvile IOS es 640x360 o 1280x720P, el formato de video es MP4. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 127 IX. Reproduzca los Archivos de Vídeo Locales en el Dispositivo Móvil IOS 9.1 Abra APP. AT&T 11:57 AM Camwf 9.2 Vaya al menú de la cámara, seleccione "SDCard Record". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings...
  • Seite 128 9.3 Seleccione uno de los archivos de vídeo a jugar. AT&T 11:57 AM SDCard Full time recording 6 Now 2017 at 4:20 PM Full time recording 6 Now 2017 at 4:15 PM Full time recording 6 Now 2017 at 4:08 PM Full time recording 6 Now 2017 at 4:02 PM Full time recording...
  • Seite 129 XI. Cambie el Nombre de la Cámara 11.1 Abra la aplicación "Camwf ". AT&T 11:57 AM Camwf 11.2 Asegúrese de que la cámara se haya añadido exitosamente a la aplicación y esté en línea. Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices...
  • Seite 130 11.3 Vaya al menú de la cámara y seleccione "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 11.4 Introduzca el nombre de la cámara nueva. AT&T 11:57 AM User Settings...
  • Seite 131 AT&T 11:57 AM User Settings Settings Device Name New name Device UID JP5DLXEVZGES11FZ111A User Name admin Password XII. Cambie la Contraseña de Inicio de Sesión de la Cámara 12.1 Abra la aplicación "Camwf ", asegúrese de que la cámara se haya añadido exitosamente a la aplicación y esté...
  • Seite 132 12.2 Vaya al menú de la cámara, seleccione "User Settings". AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 12.3 Introduzca la nueva contraseña. AT&T 11:57 AM AT&T 11:57 AM...
  • Seite 133 AT&T 11:57 AM User Settings Settings Device Name Camwf Device UID JP5DLXEVZGES11FZ111A User Name admin Password NEW PASSWORD Psaaword1 Password2 XIII. Cargue la Batería de Reserva Conecte la cámara a una fuente de alimentación externa. Cuando se carga, la luz indicadora de energía y la luz indicadora de carga estarán encendidas todo el tiempo.
  • Seite 134 Preguntas Frecuentes: P: El hotspot WiFi de la cámara no se puede encontrar en la página de configuración de WIFI del dispositivo móvil IOS. R: Por favor, pruebe las siguientes soluciones. 1. Use la fuente de alimentación para alimentar la cámara. 2.
  • Seite 135 P: ¿Cuántas cámaras se puede añadir a la aplicación? R: no hay límite. P: ¿Puedo conectar mi cámara a una PC Windows? R: Sí, pero debe añadir la cámara al dispositivo móvil de antemano, y luego instalar el software gratuito para PC en su computadora para añadir la cámara. Enlace de descarga de software de cliente de PC: http://www.mymitech.com/download.html Downloaded from www.Manualslib.com...
  • Seite 136 WIFI38 取扱説明書（IOSバージョン） I.製品概要 600ml 500ml 400ml 300ml 200ml 100ml 1. リセッ トボタン 2. 電源ボタン 3. Micro SDカードスロッ ト 4. USBポート 5. 充電インジケータ 6. WIFIインジケータ 7. 電源インジケータ 8. カメラレンズ 9. 赤外線ランプ II. ボッ クスの内容 -1× トラベルカップカメラ -1× USBケーブル -1× AC110-240V∼DC 5V電源アダプタ...
  • Seite 137 III. カメラを準備する 3.1ミニSDカードがカメラのSDカードスロッ トに挿入され、 カードが既にフォーマッ トされて いることを確認します。 SDカードの最大容量は64GBを超えないように。 Micro SDHC Class 10 Micro SDカードのみを使用することをお勧めします。 3.2ビデオカメラを外部電源に接続すると、 電源インジケータと充電インジケータが点灯し、 ビ デオカメラは自動的にオンになります。 IV.P2Pネッ トワークモード設定 （LANモード） 4.1ビデオカメラを外部電源に接続する、 或いは電源ボタンを3秒間押し続けてビデオカメラ の電源を入れます。 WIFIインジケータがゆっく り点滅していると、 カメラのWIFIホッ トスポッ ト が準備完了であることを示します。 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 138 4.2下記のQRコードをIOSモバイルデバイスでスキャンする、 またはApp Storeで Camwf を 検索してアプリケーションをダウンロードしてください。 4.3 IOSモバイルデバイスのWLAN設定ページを開き、 IOSモバイルデバイスをカメラのWIFI ホッ トスポッ トに接続します。 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 139 AT&T 11:57 AM WLAN Settings Wi-Fi RT-FHC22NUK111A 4.4 Camwf アプリを開きます。 AT&T 11:57 AM Camwf 4.5 Camwf アプリにビデオカメラを追加する。 ステップ1. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 140 AT&T 11:57 AM Devices Devices Media ステップ2. AT&T 11:57 AM Add Device Back LAN Search Devices Add Device By ID ステップ3. Downloaded from www.Manualslib.com manuals search engine...
  • Seite 141 AT&T 11:57 AM LAN search devices JP5DLXEVZGES11FZ111A ステップ4. AT&T 11:57 AM Back Add Device Device Name IP Cam Device UID JP5DLXEVZGES11FZ111A admin User Name Password 4.6 カメラが Connected と表示された場合は、 カメラのＰ２Ｐネッ トワークモード （LANモ ード） は正常に設定されます。 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 142 Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media <注>:カメラWIFIホッ トスポッ トとIOSモバイルデバイスとの間の有効な接続距離は、 約15メートル （ 49フィート） です。 V.リモートネッ トワークモードの設定 （WANモード） 5.1 Camwf アプリを開き、 カメラがアプリに正常に追加され、 オンラインになっていることを 確認します。 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf Devices Media Downloaded from www.Manualslib.com manuals search engine...
  • Seite 143 5.2 歯車アイコンをタップして、 カメラメニューに入り、 そして、 Network Settings を選択しま す。 AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 5.3 Network Settings ページに移動した、 使用可能なWIFIホッ トスポッ トを検索し、 御希望 のWIFIホッ...
  • Seite 144 AT&T 11:57 AM Network Settings Settings SSID: SSID-1 xxxxxxxx 5.5 Camwf アプリを終了する。 5.6 IOSモバイルデバイスのWIFI設定ページに戻り、 接続したのWIFIホッ トスポッ トを切断しま す。 AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM Settings WLAN Fukeside Settings WLAN WLAN Forget This Network WLAN SSID-1 Settings SSID-1...
  • Seite 145 AT&T 11:57 AM AT&T 11:57 AM WLAN WLAN Settings Settings WLAN WLAN SSID-2 SSID-2 AT&T 11:57 AM AT&T 11:57 AM AT&T 11:57 AM WLAN Settings Cellular Settings Settings Cellular Data WLAN WLAN Cellular Data Options Cellular 5.8 IOSモバイルデバイスがインターネッ トにアクセスできることを確認してから、 もう一度 Camwf アプリを開きます。...
  • Seite 146 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf Devices Media <注>: カメラが Connect Fail と表示された場合、 リモートネッ トワークモードの設定は失敗します。 リモートネッ トワークを再度設定してください。 VI. 動体検知モードを設定する 6.1 Camwf アプリを開き、 カメラがアプリに正常に追加され、 オンラインになっていることを 確認します。 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf...
  • Seite 147 6.2 歯車アイコンをタップしてカメラメニューに入り、 Device Settings を選択します。 AT&T 11:57 AM AT&T 11:57 AM Devices Settings Back Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 6.3 Alarm Record を選択し、 Motion Detection 欄で御希望のモーション検知感度を選択 します。 AT&T 11:57 AM AT&T 11:57 AM Settings...
  • Seite 148 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 149 7.2 歯車アイコンをタップしてカメラメニューに入り、 Device Settings を選択します。 AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 7.3 24h Video を選択し、 Motion Detection 機能をクローズにします。 AT&T 11:57 AM AT&T 11:57 AM Settings Settings...
  • Seite 150 AT&T 11:57 AM Settings Settings Start Time: End Time: Status: Close Record Capture Start Time: End Time: Status: Close Record Capture End Time: Start Time: Status: Close Record Capture SD record Close 24h Video Alarm Record Motion detection Close Middle High Highest HD(1920*1080)
  • Seite 151 AT&T 11:57 AM Devices Camwf Connected Devices Media 8.3 録画アイコンをタップし， 録画を開始します。 AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.4 録音アイコンをタップすると、 録音機能をオン ・ オフにできます。 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 152 AT&T 11:57 AM Camwf 00:12 Network:184 k/s Full Flip Horizontal Flip Vertical Flip Video Reset 8.5 IOSモバイルデバイスに保存されたビデオファイルを再生します。 ステップ1 AT&T 11:57 AM Devices Camwf Connected Devices Media ステップ2 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 153 AT&T 11:57 AM Photos Camwf Camwf Devices Media ステップ3 AT&T 11:57 AM Camwf Edit <注意>: IOSモバイルデバイスのビデオ解像度は640x360または1280x720P、 動画形式はMP4です 。 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 154 IX. IOSモバイルデバイスでカメラのSDカードに保存されたビデオファイルを 再生する 9.1 アプリを開きます。 AT&T 11:57 AM Camwf 9.2 歯車アイコンをタップしてカメラメニューに入り、 SDCard Record を選択します。 AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media Downloaded from www.Manualslib.com manuals search engine...
  • Seite 155 9.3 一つ再生したいビデオファイルを選択して再生します。 AT&T 11:57 AM SDCard Full time recording 6 Now 2017 at 4:20 PM Full time recording 6 Now 2017 at 4:15 PM Full time recording 6 Now 2017 at 4:08 PM Full time recording 6 Now 2017 at 4:02 PM Full time recording 6 Now 2017 at 3:57 PM Full time recording...
  • Seite 156 XI. カメラ名を変更する 11.1 Camwf アプリを開きます。 AT&T 11:57 AM Camwf 11.2 カメラが正常にアプリに追加され、 オンラインになっていることを確認します。 Camwf AT&T 11:57 AM Connected Devices Camwf Connected Devices Media Downloaded from www.Manualslib.com manuals search engine...
  • Seite 157 11.3 歯車アイコンをタップしてカメラメニューに入り、 User Settings を選択します。 AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 11.4 新しいカメラ名を入力します。 AT&T 11:57 AM User Settings Settings Device Name New name Device UID JP5DLXEVZGES11FZ111A User Name...
  • Seite 158 AT&T 11:57 AM User Settings Settings Device Name New name Device UID JP5DLXEVZGES11FZ111A admin User Name Password XII. カメラのログインパスワードを変更する 12.1 Camwf アプリを開き、 カメラがアプリに正常に追加され、 オンラインになっていること を確認します。 Camwf AT&T 11:57 AM AT&T 11:57 AM Connected Devices Camwf Connected Camwf Devices Media Downloaded from www.Manualslib.com manuals search engine...
  • Seite 159 12.2 歯車アイコンをタップしてカメラメニューに入り、 User Settings を選択します。 AT&T 11:57 AM AT&T 11:57 AM Devices Back Settings Camwf User Settings Connected Device Settings Network Settings SDCard Record Refresh push About Devices Media 12.3 新しいパスワードを入力します。 AT&T 11:57 AM AT&T 11:57 AM User Settings User Settings Settings Settings Device Name...
  • Seite 160 AT&T 11:57 AM User Settings Settings Device Name Camwf Device UID JP5DLXEVZGES11FZ111A User Name admin Password NEW PASSWORD Psaaword1 Password2 XIII. スペアバッテリーを充電 ビデオカメラを外部電源に接続します。 充電する時に電源インジケータと充電インジケータ が常に点灯します。 充電時間が6時間に達したら、 カメラの電源を切ってください。 Downloaded from www.Manualslib.com manuals search engine...
  • Seite 161 よく ある質問 ： Q: IOS携帯端末のWIFI設定ページでカメラのWIFIホッ トスポッ トが見つかりません。 A: 以下の解決策を試してください。 1. 外部電源を使用してビデオカメラに電源を給電します。 2. カメラをリセッ トします。 3. IOSモバイルデバイスとカメラ間の距離を確認し、 IOSモバイルデバイスがカメラの有効な WIFI接続距離内にIOSモバイルデバイスのWIFI設定ページを2分間待ってリフレッシュするこ とを確認します。 4. IOSのWIFI機能をオフにして、 しばらくお待ちください。 Q: APPにビデオがない場合、 スク リーン黒画面または画面が常に検索されています状態。 A: APPを終了し、 もう一度ログインして、 カメラがオンラインであることを確認します。 Q: コンピュータで再生するビデオはノイズのみ。 A: 撮影中はカメラの電源が切れています。 Q: カメラはしばしば接続が切れる。 A: 外部電源を使用してビデオカメラに電源を給電し、 ビデオカメラとWIFIホッ トスポッ ト間の 距離を調整します。...
  • Seite 162 Q: アプリに何台のカメラを追加できますか？ A: 制限なし Q: カメラをWindows PCに接続するこ とはできますか？ A:できます、 ただし、 事前にモバイルデバイスにカメラを追加し、 無料のPCソフトウェアをコン ピュータにインストールしてカメラを追加する必要があります。 PCクライアントソフトウェアの ダウンロードリンク ： http://www.mymitech.com/download.html Downloaded from www.Manualslib.com manuals search engine...