Environmental Aspects; Disposal Of Packaging And Appliance - Pelgrim GKB672 Anleitung

faults
74
Table
Fault Cause
The burner does not burn - Burner parts incorrectly
evenly. installed.
- Burner parts dirty or damp.
- Wrong type of gas used
(where bottled gas is used).
The burner goes out after - Control knob not kept
igniting. pressed in long enough
(GKB673/GKB678W/GKB634/
GKB636/GKB636W).
75
Solution
- Assemble the burner parts
using the centring ridges and
ensure that they fit properly
together.
- Clean and dry the burner
parts, checking that the
outflow holes are open.
- Check that the gas used is
suitable for the appliance.
- Keep the control knob
pressed in for at least
5 seconds.

environmental aspects

Disposal of packaging and appliance

In the manufacturing of this appliance use has been made of durable materials.
At the end of its lifecycle this appliance must be disposed of in a responsible
manner. The authorities can advise you on this.
The appliance packaging is recyclable. The following may have been used:
■ cardboard;
paper;
■
■ polythene film (PE);
■ CFC-free polystyrene (PS hard foam);
polypropylene tape (PP).
■
Dispose of these materials in a responsible manner and in accordance with
government regulations.