Timer
The timer is able to be used simultaneous with all 2 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.
Setting and modification of the cooking time
Action
To select the power level
To select « Timer »
To select the heating zone
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts.
To stop the cooking time
Action
To select « Timer »
To select heating zone
Deactivate « Timer »
Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings
and the heating zone stops.
To stop the sound and the blinking it is enough to press key [
Egg timer function
Action
Activate the hob
To select « Timer »
To select heating zone
Decrease the time
Increase the time
After a few seconds the control light stops with blinking and the timer starts.
To stop the egg timer function
Action
To select « Timer »
To select heating zone
To stop the « Timer »
Automatic cooking
All the cooking zones are equipped with an automatic cooking device. The cooking zone starts
at full power during a certain time, then reduces automatically its power on the pre-selected
level.
Start-up :
Action
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
Control panel
Press key [ + ] or [ - ]
Press key [
]
Press key [ + ] or [ - ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [
]
Press key [ + ] or [ - ]
Press key [ - ]
Control panel
Press key [ 0/I ]
Press key [
]
Press key [ + ] or [ - ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [
]
Press key [ + ] or [ - ]
Press key [ - ]
]
Control panel
Press key [ + ]
Re-press key [ + ]
Press key [ - ]
51
Display
[ 1 ]....[ 9 ]
Control light timer on
[ 30 ] to 29,28,27,...
The time increases...
Display
The remaining time
Control light timer blinking
Displays [ 00 ] then stops
].
Display
The zone control lights are on
Control light timer on
[ 30 ] to 29,28,27,...
The time increases...
Display
time remaining
Control light timer blinking
Displays [ 00 ] then stops
Display
Pass from [ 4 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] pass to [ 8 ] [ 7 ]
[ 7 ] is blinking with [ A ]