Maurice Lacroix LC 1048 Gebrauchsanweisung Seite 9

1. To adjust time :
– Pull the crown out to position 3 : the watch stops.
– Turn the crown clockwise or counter‑clockwise until the position
of the hour and minute hands is correct. Note : when the date
changes, hands indicate midnight.
– When the position of the seconds hand is correct, push the crown
back to the neutral position (pos. 1).
2. Moonphase and date setting :
(quick date adjustment)
– Pull out the crown to position 2.
– Look up on page 28 of this booklet on what date the last full moon
took place. Turn the crown clockwise until the moonphase corres‑
ponds with the respective date ; for this it might be necessary to
turn the crown repeatedly. Date and moonphase change together
(1 moonphase = 30 days). When adjusted accordingly, continue
turning the crown until you come to today's date.
– Push back the crown to position 1.
Date correction at the end of the month :
(do this after having made all other adjustments)
– Pull out crown to position 2.
– Turn it slowly clockwise until the date is set.
– Push back the crown to position 1.
Downloaded from www.Manualslib.com manuals search engine
9