Simons Voss Technologies ST10.08007S Kurzanleitung Seite 44

8. Battery replacement
3. Using a screwdriver, slide one side of the battery brackets into the
IMPORTANT
The spring tension of the clamps causes the clamps to jump out.
The clamps are under tension. They can jump out and get lost when
you release them.
4. Remove the battery.
5. Remove all other batteries in the same way.
NOTE
All batteries are discharged at approximately the same rate. Therefore,
replace all batteries at the same time.
44 / 180
designated opening.
MK/SI PinCode-Tastatur (on-
line)
EN