Programming - Simons Voss Technologies ST10.08007S Kurzanleitung

5. Programming

The PIN code keypad can be reset to storage mode. This process also
deletes all network settings.
NOTE
Enter the numbers consecutively. The PIN code keypad only signals the
pressing of the keys, but not completion of the individual steps in the
process.
1. Enter 000 00.
2. Enter the Master PIN.
9
9
NOTE
If the PIN code keypad is already in storage mode, it cannot be set to
storage mode again. In such a case, the process will be interrupted with
a red flashing light and beeping for a long time.
5 Programming
The PIN code keypad is programmed in the MobileKey web app
( https://app.my-mobilekey.com
SmartIntego manager and in the integrator system.
40 / 180
PIN code keypad beeps and flashes green briefly twice.
Storage mode set.
MK/SI PinCode-Tastatur (on-
) or for SmartIntego products in the
line)
EN