Factory Settings; Maintenance; After-Sales Service - S&P ECOAIR LC Handbuch

EcoAIR MLC
EcoAIR LC version similar to H model,
fi tted with an internal pull cord switch
to operate the boost when the humi-
dity level is below the set point (fi g.5).
When switching off the internal pull
cord switch, the fan continues to ope-
rate at boost the time set by the timer
then runs at trickle speed, unless the
humidity level exceeds the set point.
EcoAIR DLC
Models provided with a PIR (passive
infra-red) detector (movement detec-
ted with a maximum distance of 4 me-
tres) and with an adjustable "run on"
timer (1 to 30 minutes).
The selection of the run on time is
done with the dip-switches 6 and 7:
setting between 1, 5, 15 and 30 mi-
nutes.
1. Continuous operation: The extrac-
tor operates continuously at the
setting trickle speed. When the ex-
tractor detects a movement the fan
is boosted to high speed during the
selected period set on the timer
and then automatically returns to
trickle speed (fi g.3).
2. Intermittent operation: The unit
starts automatically when a move-
ment is detected and the unit con-
tinues to operate for the selected
period set on the over-run timer
(fi g.3).

FACTORY SETTINGS

Interval function: OFF
Interval time: 4h
Humidistat: 60%HR
Timer: 1 minute
Start-up timer function: OFF
Continuous operation: ON

MAINTENANCE

The extractor fan only requires perio-
dical cleaning using a cloth lightly im-
pregnated with a soft detergent.
AFTER SALES SERVICE
We recommend you not to try to dis-
mantle or remove any other parts
than those mentioned as any tam-
pering would automatically cancel
the S&P guarantee. If you detect any
fault, contact your S&P dealer.
The CE norm and our com-
mitment to future genera-
tions require us to recycle
waste material; please de-
posit all remaining elements
of the packaging into containers for
recycling, and carry the equipment
that has been replaced to the nearest
waste centre or your dealer.
S&P reserves the right to alter speci-
fi cations without notice.
21