ASROCK Z170 Pro4S Bedienungsanleitung Seite 22

20
Downloaded from www.Manualslib.com
Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 15)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 6)
(SATA3_1:
see p.1, No. 7)
(SATA3_2:
see p.1, No. 12)
(SATA3_3:
see p.1, No. 14)
(SATA3_4:
see p.1, No. 11)
(SATA3_5:
see p.1, No. 10)
Serial ATA Express
SATA_EXP1 SATA3_5
Connectors
(SATA_EXP0:
see p.1, No. 16)
SATA_EXP0
(SATA_EXP1:
see p.1, No. 9)
USB 2.0 Headers
(9-pin USB_1_2)
(see p.1, No. 20)
(9-pin USB_3_4)
(see p.1, No. 19)
manuals search engine
Please connect the
SPEAKER
DUMMY
chassis power LED and
DUMMY
the chassis speaker to this
+5V
header.
1
PLED+
PLED+
PLED-
These six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
SATA3_5 SATA3_4
If the Ultra M.2 Socket
(M2_1) is occupied by a
SATA-type M.2 device,
SATA3_3 SATA3_2
SATA3_0 and SATA3_1
will be disabled.
Please connect either
SATA3_4
SATA or PCIe storage
devices to these
connectors.
SATA3_3 SATA3_2
There are two headers
USB_PWR
on this motherboard.
P-
P+
GND
Each USB 2.0 header can
DUMMY
support two ports.
1
GND
P+
P-
USB_PWR