The light does not contain any parts
that
require
Never open the light housing.
Handling Batteries
Insert the batteries with the correct
polarity. Never try to recharge the
batteries
circumstances throw them into fire.
Do not mix batteries (old and new or
carbon and alkaline, etc.).
Leaked or damaged batteries may
cause skin injury. For this reason it
is very important to wear protective
gloves.
Intended Use
This light is to be fitted to the pole of a
garden umbrella. The light should not be
exposed directly to the elements, but
must always be fixed underneath an
umbrella.
This light is not intended for commercial
use. This device fulfils all that relates to
CE Conformity, relevant norms and
standards. Any modifications to the
equipment other than recommended
changes by the manufacturer may result
in these directives no longer being met.
Package Contents
Garden umbrella light UL2410
3 batteries (1.5V, size AA)
user
maintenance.
and
under
Description
The items in the figure have the following
meaning:
[1]
Garden umbrella light
[2]
3 AA-sized batteries
[3]
Mounting bracket
no
[4]
On/Off button
Technical Specifications
Operating voltage:
Lamps:
Pole diameter:
Batteries:
Type of protection:
Getting Started
Inserting the Batteries
The battery compartment is located on
the underside of the garden light.
Open the battery compartment.
Insert
batteries into the battery compartment.
Always pay attention to the polarity (+
and -). For this purpose the + symbol is
indicated three times in the battery
compartment.
Close the battery compartment.
Remove the batteries from the
battery compartment when you are
not going to use the light for a long
period of time.
4.5 V
24 LEDs,
LED Class 1
28 - 50 mm
3 batteries
(1.5 V, size AA)
IP44
the
supplied
1.5 V / AA-size
3