Silvercrest IUK 5 A1 - IAN 48807 Bedienungsanleitung Seite 41

Screen
If you click on "Screen" in the main window, a menu opens via which you can select the desired
number of the screen tiles. The maximum number of tiles that can be displayed is 64. You can assign
a separate camera image to each tile by dragging a camera from the camera list on the lower left of
the main window onto the desired tile. If you double-click on one of the tiles, this image will then be
displayed full screen.
If you click on "Screen" on the main window and select "Full screen", the tiles are shown full-screen.
Click on "Exit Full screen" to show the tiles back inside the main window.
On the top right above the camera image, 5 icons
displayed if you hover over them with the mouse pointer.
Listen:
Speak:
Recording:
Snapshot:
Close:
Log
If you click on "Log" on the main window and then on "Log window", a window will open in the right
of the head bar with the current event logs on the system connection status. Click on "Log" and then
"Log window" again to close the window.
About
If you click on "About" in the main window and then on "About", the version number of the program
will be displayed. Then click on "OK" to close the window.
The remaining camera controls using the buttons on the left-hand side of the main window correspond
exactly to the controls in the web browser already described. When using more than one camera,
you must start by clicking on the image of the camera that you want to control with the mouse.
The activated image will be bordered in red.
IUK 5 A1
If the Listen function is activated, the audio signals captured by the camera
will be sent to the monitoring computer and played back via its connected
speakers or headphones.
If the Speak function is activated, audio signals that are captured by a
microphone connected to the monitoring computer will be transmitted to the
camera and played back via its integrated speaker
If the Recording function is activated, the camera image is continuously
recorded.
If you click on the Snapshot icon, a snapshot of the current camera image is
captured and saved.
Clicking on this icon will close the respective camera image on the main
window.
appear. Their function is
.
GB
37