Silvercrest IUK 5 A1 - IAN 48807 Bedienungsanleitung Seite 18

2) The program fi nds the camera and when you click on the device name "IPCAM", the relevant
network information appears:
GB
The network confi guration of the surveillance camera is carried out automatically if the "Auto"
option is activated and the router is in DHCP mode. If the camera does not appear on the list,
you can refresh the list by clicking on the "Find" button.
Here, we strongly recommend that you retain the suggested parameters. Otherwise, there is a
risk that the camera will not work correctly due to incorrect settings.
In case of problems, contact your network administrator.
NOTE
► In DHCP operation, your router will issue IP addresses automatically on demand.
You can also enter the network data manually, for instance, if the automatic confi guration does
not work.
To do this, select the option "Custom". This activates the input fi elds for the confi guration.
Now enter the network data for the surveillance camera manually. Generally, these data
include the network settings for your router. For further information, read the operating
instructions for your router.
Click "Apply" to accept the new settings.
14 IUK 5 A1