Frame Rate - Silvercrest IUK 5 A1 - IAN 48807 Bedienungsanleitung

Mode
Here you can set the interlace frequency to reduce image fl icker. 50 or 60 Hz are
available.
Resolution
In this control fi eld, you can switch the image resolution between VGA (640 x 480 pixels)
and QVGA (320 x 240 pixels).

Frame rate

You can use this control fi eld to set the frame rate per second from 1–25 images.
The higher the number, the smoother the motion.
PT speed
This sets the speed with which the servomotors carry out the tilt and pan movements.
You can choose between "Slow", "Medium" or "Fast".
Brightness
Set the image brightness to the required setting within the range 0–255.
Contrast
Set the contrast to the required setting within the range 0–255.
Click on "Reset to default video settings" to return the brightness and contrast settings
to their original default values.
Save preset position
This function enables you to save a camera position of your choice.
To save a camera position, start by aligning the camera in the direction you want.
Then click on "Save preset position" and use the mouse to select the desired number
(1–16) for this setting from the number fi eld that appears then.
To move the camera to a previously saved position, click on "Choose preset position"
and use the mouse to select the number (1–16) of the desired position from the number
fi eld that appears then.
−> To display one camera image.
−> To simultaneously display 4 camera images as tiles.
−> To simultaneously display 9 camera images as tiles.
The activated option is marked orange.
IUK 5 A1
GB
19