Invacare Aquatec Pure Gebrauchsanweisung Seite 21

Setting water pressure
The water pressure can be set in three steps (indicated by
first, middle and last LED):
1. Press CLEANSING/MOVE button C on the remote
control.
2. Press HIGH respectively LOW button J on the remote
control.
• The water pressure of the cleaning nozzle is raised
or lowered by one step and displayed on the LED
A.
The last set value of the water pressure is
automatically saved by the device.
Setting nozzle position
1. Press FRONT respectively BACK button I during
cleansing function on the remote control.
• The cleansing nozzles move forwards respectively
backwards.
When the cleansing process is complete and you
move away from the seat, the nozzle moves back
into the last setting of the nozzle position.
Setting water temperature
The water temperature can be set in four steps:
1590625-D
1. Press WATER button H repeatedly on the remote
control, until the desired temperature is reached.
• The water temperature is displayed on the LED
display above.
If the cleaning functions are repeatedly started, the
water temperature drops gradually. To regain the
desired water temperature, suspend the cleaning
function for three minutes. The last value of the
water temperature is automatically saved by the
device.
Setting seat temperature
The seat temperature can be set in four steps:
1. Press SEAT button G repeatedly on the remote control,
until the desired temperature is reached.
• The seat temperature is displayed on the LED
display above.
The last value of the seat temperature is
automatically saved by the device.
The seat is equipped with an internal combustion protection
system. If the seat temperature is set to "High" and you
Usage
21