Mounting and Operating Instructions Reader series Insertic
11. IDS Operating Instruction 2
for IK3 EU BUS-2 und DCM BUS-2 from V11.xx
11.1
Operating and indication elements
!
LED indication and keypad:
LEDs
green: ready
yellow: disarmed
green yellow red
red:
The state of the indicator is as follows:
Disarming
Arming
Numeric keypad for PIN entry
(PIN = Personal identification number)
When idle, all indicators remain dark. When a function is being performed, the
indicator is actuated for approx. 5 seconds according to the function. For details see
following Chapters.
!
Buzzer signal:
Reading acknowledgement
after activating every key or data carrier
acknowledgement.
Positive acknowledgement
for successfully performed action.
Negative acknowledgement
(4x short in 1 sec.)
There is no authorization or the action cannot be
performed.
11.2 AC Function
(Door release)
- Hold data carrier in the reading range (and/or enter PIN).
- Acknowledgment occurs.
Optical
Authorised
Ready (green)
5 sec.
Disarmed (yellow)
Acoustic
2 sec.
(signal)
Positive
acknowledegement
Time-controlled
Action
door release
Alarm
blinking
on
off
125 ms
2 sec.
1 sec.
No authorisation or
AC function not activated
1 sec.
Negative
acknowledegement
No door release
11.3 Arming/disarming an IDS
Reader with keypad
- Strike the corresponding key (arm or disarm).
Green LED lights up
Yellow LED lights up when disarmed and remains dark when armed.
- Hold data carrier in the reading range and remove and/or enter PIN.
- Acknowledgement (according to tables below).
Reader without keypad
- Hold data carrier in the reading range and remove.
Green LED lights up
Yellow LED lights up when disarmed and remains dark when armed.
- Hold data carrier again in the reading range after 1 to max 4 seconds.
- Acknowledgement (according to tables below).
Acknowledgement when arming:
Optical
Fulfilled with authorisation
and positive drive
Ready
5 sec.
(green)
Disarmed
Dis-
Armed
armed
(yellow)
Alarm
(red)
Acoustic
2 sec.
(signal)
Positive
acknowledgement
Action
System will be
armed
Acknowledgement when disarming:
Optical
Fulfilled with authorisation
and positive drive
Ready
5 sec.
(green)
Disarmed
Dis-
Armed
armed
(yellow)
Alarm
Lights up in case
(red)
of alarm
Acoustic
2 sec.
(signal)
Positive
acknowledgement
Action
System will be
disarmed
11.4 AC function after disarming
Depending on the system programming, there are
function after disarming:
1. To open the door, hold the ID data carrier
or
2. AC function will
automatically
be active after disarming.
(only via IK3 EU)
With authorisation but
No authorisation
no positive drive
5 sec.
5 sec.
Lights up in case
of alarm
1 sec.
1 sec.
Negative
Negative
acknowledgement
acknowledgement
System will
not
be
System will
armed
armed
With authorisation but
No authorisation
no positive drive
5 sec.
5 sec.
Lights up in case
of alarm
1 sec.
1 sec.
Negative
Negative
acknowledgement
acknowledgement
System will
not
be
System will
disarmed
disarmed
two possibilities
to activate the AC
one more time
in the reading range.
11
not
be
not
be