12. Technical Data - Honeywell Insertic-Serie Montage- Und Bedienungsanleitung

12
11.5 Learning mode for data carriers
In learning mode it is simple to authorize new data carriers or delete existing ones.
Newly "learned" data carriers automatically receive
version V09 (MB24/48/100) and version V03 (MB256 plus), the PINs / authorizations /
time zones must be assigned afterwards via the programming functions .
To start the learning mode, you need a
exclusively for this purpose in the system. However, the learning key has no
authorizations.
As long as learning mode is activated, you can enter or delete as many data carriers as
you want one after another.
LED indication:
The "Ready" LED (green) and the "Disarmed" LED (yellow)
serve as a
mode.
green yellow red
The red LED lights up in case of alarm
Buzzer signals:
- Positive acknowledgement:
- Learning mode activated
- Data carrier authorized
- Data carrier erased
- Negative acknowledgement:
Invalid action.
An invalid action is given if a programmed data
carrier is to be learned or an unprogrammed data
carrier is to be erased.
!
Reader with keypad
Start learning mode
Hold the learning key in the reading field until buzzer signal
L
LEDs green and yellow light up
Press the "I" button
LEDs green and yellow start flashing,
the learning mode is activated
Learn data carrier
Hold the new data carrier in the reading field until buzzer signal
ID
LED green is on, LED yellow flashes
Press the "I" button, short buzzer signal
LEDs green and yellow are flashing
Delete data carrier
Hold the old data carrier in the reading field until buzzer signal
ID
LED green is on, LED yellow flashes
Press the "O" button, 2 short buzzer signals
LEDs green and yellow flashing
Exit learning mode
Hold the learning key in the reading field until buzzer
C
L L
signal, then press the
or
C only press the "O"
or
Exits automatically approx. 60 seconds after the last operation
All LEDs off
Honeywell Security and Fire Solutions
Novar GmbH
Johannes-Mauthe-Straße 14
D-72458 Albstadt
www.honeywell.com/security/de
general authorization
"learning key" . This is a data carrier set up
visual acknowledgement signal in learning
2 Sek.
Positive
1 Sek.
Negative
red lights up in case of alarm
green yellow red
, short buzzer signal
"O" button
button
P30729-45-002-14
2017-06-28
© 2017 Novar GmbH
Mounting and Operating Instructions Reader series Insertic
!
Reader without keypad
Start learning mode
, as of
Hold the learning key in the reading field until buzzer signal
L
LEDs green and yellow light up
LEDs green and yellow start flashing,
the learning mode is activated
Learn data carrier
Hold the new data carrier in the reading field until buzzer signal
ID
LED green is on, LED yellow flashes
short buzzer signal
LEDs green and yellow flashing
Exit learning mode
Hold the learn master key in the reading range until buzzer signal
L
or
Exits automatically approx. 60 seconds after the last operation
All LEDs off

12. Technical Data

Operating voltage
Operating voltage range
Power consumption max.
Interfaces:
- RS-485
- Clock/Data
- Wiegand
Signalling elements
Supported data carriers, reading distance:
- LEGIC, mifare, proX1, proX2
- proX, HITAG 1/2/S, EM 4102
- mifare Classic (1 kByte)
- mifare DESFire EV1
Frequency range, transmission power:
- proX
- mifare
- LEGIC
Protection category as per EN 60529: At the front (in mounted condition) IP 54.
Operating temperature range
Storage temperature range
Case front module and back module
Dimensions (W x H x D)
Mounting case (Ø x T)
1)
The denoted reading distance can only be garanteed by using data carriers
provided by our company.
Hereby, the Novar GmbH declares that the Reader series Insertic, Item no.
027666.xx to 027677.xx is in compliance with Directive 2014/53/EU.
The full text of the EU declaration can be downloaded from our homepage
https://www.security.honeywell.de/ in the service/download area.
red lights up in case of alarm
green yellow red
12 V DC
8 to 30 V DC
2.5 Watt
Module bus, (D, D*)
not galvanically separated,
addressing via DIP switches,
switchable terminating resistor (DIP switch)
TTL level, 4 bit code according to DIN 9785,
resting level high
HID 24 Bit Wiegand format
3 LEDs green, yellow, red
1 Piezo buzzer
1)
typ. 4 cm with ID cards
typ. 2 cm with key fobs
typ. 4 cm with ID cards in EC format
typ. 2 cm with key fobs
typ. 4 cm with ID cards in EC format
typ. 2 cm with key fobs
typ. 1.5 cm (only ID cards in EC format)
125 kHz, <10 dBµA/m
13,56 MHz, <0 dBµA/m
13,56 MHz, 4.5 dBµA/m, distance 10 m (max.)
The protection type of IP 54 that maximum
can be reached is depending on the sealing
against the mounting wall.
-25 °C to +60 °C
-30 °C to +70 °C
Plastic
81 x 81 x 11 mm
56 x 24 mm