Jomox T-RACKONIZER Bedienungsanleitung Seite 11

User Interface Digital Delay Section
The built-in digital stereo delay takes a part of the input audio signal and
passes it through its various delay, chorus or reverb algorithms.
The output signal from the delay can be fed into the filter with positive or
negative phase via the knobs Delay In (1+2).
Then, the knobs Delay Feedback (1+2) feed the analog signal from the
filter back into the analog input of the delay.
Program:
This knob chooses the delay program. One of 8 LEDs arranged in a circle
light up for the currently selected program. Both parameters Para 1 and
Para 2 have different functions and ranges for different programs. Also,
the LFO may modulate single parameters in various programs.
Please find more information about the different programs in the following
table:
No. Program
1 Tracker
2 Siner
3 Warp
4 Waveguide
5 Delay I
6 Delay II
7 Reverb I
8 Reverb II
11
Downloaded from www.Manualslib.com
Description
Audio VCO Tracker
Sine Wave enveloped
+ modulated by Audio
Audio VCO Tracker +
Pipes mixed to obtain
crazy effect
4 short wave pipes
(delay lines)
delay range 0.6-30ms
2 equally long delays
3ms-0.5s
One long delay +
one short delay
Reverb program 1
Reverb program 2
manuals search engine
Para 1 Para 2
VCO PLL
Volume Tracking
Sine Input->FM
Frequency Modulation
Pipe 1 Pipe 2
length length
Pipe 1 Pipe 2
0.6-30ms 0.3-15ms
Delay 1 Delay 2
Delay 1 Delay 2
3ms-1s 0.6-60ms
HP Filter Reverb
Time
HP Filter Reverb
Time
T-Rackonizer Operating Manual
LFO/Envelope
Chorus
Intensity
Sine Amount
Envelope
Pipe 3+4 length
Pipe 3+4 length
LP Filter
LP Filter