Storing And Maintenance - Yard Force GDGS12 Original Bedienungsanleitung

Before performing any repair work, always switch off the device and remove the battery
pack.
1.
2.
3.
4.
Battery Maintenance:
Use the following procedures to enable optimum usage of the battery:
1.
2.
3.
4.
Storage:
Clean the exterior of the machine thoroughly using a soft brush and cloth, Do not use
water, solvents or polishes.
Store the machine in a dry place .Do not place other objects on top of the machine.
Transport
Use the original packaging to ship whenever possible.
Downloaded from www.Manualslib.com

STORING AND MAINTENANCE

WARNING
Do not spray the unit with water. Ingress of water may destroy the battery pack and
the electric motor.
Clean the unit with a cloth, hand brush, etc.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working
condition;
Replace worn or damaged parts for safety.
Protect the battery against moisture and water.
Store the battery only with in a temperature range from 0ºC to 45ºC. As an example,
do not leave the battery in a vehicle or in the reciprocating sawing direct sunlight.
Clean the ventilation slots of the battery occasionally with a soft, clean and dry brush.
A considerably shortened operating time after charging is an indication that the
battery is exhausted and must be replaced.
If you do not use the product for a long time, please charge and discharge the battery
pack once every 6 months.
manuals search engine
24