Assembly - Yard Force GDGS12 Original Bedienungsanleitung

Inserting/Replacing the Saw Blade To install the blade (Fig.5)
Turn the quick-action blade clamp anti-clockwise with one hand, with aligning the saw
blade
with locating slot, insert the saw blade into corresponding slot with another hand.
Release the quick-action action clamp, and it will spring back to hold the saw blade in
place securely.
Before using it, Double check the tightness of the blade by pulling it.
To remove the blade (Fig. 6)
Turn the blade clamp in anti-clockwise with one hand, then remove the saw blade from the
locating slot with the other hand. Release the blade clamp and it will go back to its original
position.
hot after using, potentially causing personal injury.
Downloaded from www.Manualslib.com
Fig.5
Fig.6
CAUTION! Do not handle blades without gloves, as they are sharp and can become
manuals search engine

ASSEMBLY

Cutting blade has been assembled
Cutting blade has been removed
18