Yard Force GDGS12 Original Bedienungsanleitung Seite 22

Avoid conducting short charges. Make sure that the battery is fully charged every time by
allowing the charger to complete its full charging cycle.
Avoid allowing lose items like screws or nails etc. to be stored with battery packs as these
or similar items can short battery packs and cause a fire or explosion
Always unplug the charger when not in use and store in a dry secure place.
Avoid charging or storing your battery in temperatures below 0°C and above 45°C.
Cool down hot battery pack from a just-operated tool for approximately 30 minutes before
attempting to recharge.
Removing and inserting the battery pack(Fig 8)
To insert the battery pack
Aligning the battery pack with corresponding opening of the device, push it into the device
until you heard a sound of "click", it means the battery pack has been locked in place
securely.
To remove the battery pack from the tool (Fig 9)
Depress the battery pack release button located on either side of the battery pack.
And pull the battery pack out and remove it from the tool.
Downloaded from www.Manualslib.com
Fig.8
WARNING: make sure that the tool is "OFF"
Fig.9
manuals search engine
OPERATION
Depress the release button
20