Yard Force GDGS12 Original Bedienungsanleitung Seite 23

Power indicator(Fig.10)
Insert the battery to the device, and press the power indicator button. Three situations you
will facing, list as below:
Red\Yellow\Green LED lighting--- Power is full
Red\Yellow LED lighting----- 60% Power volume
Only Red LED lighting----- less than 20% Power volume
Switching ON/OFF (Fig 11)
The device is equipped with lock-off button to avoid unintentional starting.
To switch on
Depress the lock-off button either from left side or right side and hold it in place,
meanwhile squeeze the trigger.
To switch off
Release the trigger.
Operating the reciprocating saw
Plunge cutting (Fig 12)
When make a plunge cutting, it no need to using the clamping jaw.
1.
2.
3.
4.
Downloaded from www.Manualslib.com
Power indicator button
Fig.11
Place the bottom edge of the front guard onto the work piece.
Switch on the tool.
Tip the saw forward and plunge the saw blade into the work piece.
Tilt the saw gradually, until hold it upright, and cutting along the target line.
manuals search engine
OPERATION
Fig.10
Green light
Yellow light
Red light
Lock-off button
Switch trigger
21