Herunterladen Inhalt Inhalt Diese Seite drucken

HQ Power ALISON I Bedienungsanleitung Seite 7

36x3w leds dmx-gesteuert
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

function
play
manual
control
display
reset
c. DMX Mode
This mode allows you to control the fixture by any universal DMX controller.
All DMX-controlled devices need a digital start address so that the correct device responds to the signals.
This digital start address is the channel number from which the device starts to "listen" to the DMX
controller. The same starting address can be used for a whole group of devices or an individual address can
be set for every device.
When all devices have the same address, all the units will "listen" to the control signal on one particular
channel. In other words: changing the settings of one channel will affect all devices simultaneously. If you
set individual addresses, each device will "listen" to a separate channel number. Changing the settings of
one channel will only affect the device in question.
In case of the 12-channel VDPL3603MHW11, you will have to set the start address of the first unit to 1
(CH1~12), the second unit to 13 (1 + 12) (CH13~24), the third to 25 (13 + 12) (CH25~36), and so on.
Press <MODE> until <Addr> is displayed.
Use <UP> or <DOWN> to set the DMX starting address (A001~A512). Press <Enter> to confirm.
d. DMX Channel Values
channel
1
2
3
4
5
6
7
8
V. 01 – 31/01/2012
Downloaded from
www.Manualslib.com
display
<PLAY>
<At01>
<At02>
<Sn01>
<Sn02>
<dnCo>
<SLAE>
<Man>
<CH01>
<d000>
<CH12>
<d255>
<dISP>
<No>
<Yes>
<rEST>
<FACt>
<Moto>
function
from
0
shutter/strobe
7
dimmer
0
0
5
10
15
20
25
colour
30
35
40
50
151
201
colour change speed
0
pan
0
tilt
0
pan fine
0
tilt fine
0
manuals search engine
VDPL3603MHW11
description
auto program 1-2
sound controlled mode 1-2
DMX controlled mode
slave mode
Select the setting for each channel.
normal display
180° rotated display
Press <Enter> for 5 seconds to reset all settings except the
DMX starting address.
Press <Enter> for 5 seconds to reset all settings including the
DMX starting address.
to
description
6
shutter closed
255
strobe slow -> fast
255
master dimmer, 0-100%
4
white
9
red
14
orange
19
yellow
24
green
29
light blue
34
blue
39
magenta
49
rose
150
colour change function 1
200
rose
255
colour change function 2
255
slow -> fast
255
rotate head horizontally (127 = neutral)
255
move head vertically (127 = neutral)
255
rotate head horizontally – small increments
255
move head vertically – small increments
7
©Velleman nv

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vdpl3603mhw11

Inhaltsverzeichnis