Technical Data - Fujitsu D2151 Kurzbeschreibung

Brief description of the mainboard
Installing/removing processor (with heat sink)

Technical data

• Intel Core Duo with 800 or 1066 MHz front side bus in the LGA775 design (FMB06-65W)
• Intel Pentium 4 with 533/800/1066 MHz front side bus in the LGA775
design (Mainstream FMB 05A)
• Intel Celeron D with 533 MHz Front Side Bus in the LGA775 design
• A current list of the processors supported by this mainboard is available on the
Internet at: "http://ts.fujitsu.com/mainboards".
2 - English
Downloaded from www.Manualslib.com
Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in your system's operating manual.
Never touch the underside of the processor. Even minor soiling such as sweat
from the skin can impair the processor's operation or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent do not insert the processor in any case as
it may be damaged by doing so. Please contact the responsible vendor.
manuals search engine
A26361-D2151-Z212-1-8N19, edition 1