Herunterladen Inhalt Inhalt Diese Seite drucken

Ayce G46SH-Y Gebrauchsanweisung Seite 50

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Uneven or poor finish
Blunt blade
with yellowing of the
Cutting height set too low
longer/lower grasses
Inadequate ejection of
Cutting height is too low
cut grass into collector
Worn or bent blade
bag and/or excess grass
Blockage between deck and
clippings left on the
collector bag or bag blocked
surface
STORING
For transporting the machine:
– Secure it during transport to prevent fuel loss, damage or injury
– empty the fuel tank completely first to avoid the leakage
Empty fuel
– Hold a collection container beneath the fuel tank.
– Unscrew the tank cap and remove it.
– Take the machine to bottom up, and drain it. (see Fig.16)
– Re do above after several minutes.
– Allow the fuel to run out completely.
Fig. 16
Empty oil
Please refer to paragraph "engine oil replacement".
Store the Machine, a manual and any accessories in the original container. In this way,
you will always and quickly access all the information and parts.
In the case of transport the device should be well packed and use the original packaging
in order to avoid damage during transport.
The machine should be stored in dry, well-ventilated area with an empty fuel tank / oil.
Fuel should not be stored near the machine.
Sharpen or renew the blade
Raise the cutting height
Raise the cutting height
Replace the blade
Clear blockage/clean bag
EU declaration of conformity
1. Apparatus model/Product
Product: PETROL LAWN MOWER RMB46 HW HONDA
type: G46SH-Y
Batch or serial number: 1912-2012
2. Name and address of the manufacturer or his authorised representative:
Jumbo-Markt AG, Industriestrasse 34, 8305 Dietlikon
3. This declaration of conformity is issued under the sole responsibility of the manufacturer.
4. Object of the declaration
PETROL LAWN MOWER
Model: G46SH-Y
3
Engine displacement: 145cm
Brand: ayce
5. The object of the declaration described above is in conformity with the relevant Union
harmonisation legislation:
2006/42/EC "Machinery"
2014/30/EU "Electro Magnetic Compatibility"
2000/14/EC + 2005/88/EC "Noise outdoor"
2016/1628/EU+2017/656/EU "Emissions of pollutants""
6. References to the relevant harmonised standards used, including the date of the
standard:
EN ISO 5395-1 : 2013 + A1
EN ISO 5395-2 : 2013 + A1 + A2
EN ISO 14982 : 2009
7. Additional information:
Measured sound power level: 79.5 dB (A)
Guaranteed sound power level: 96 dB (A)
Conformity assessment procedure concerning directive 2000/14/EC: Annex V
Person authorised to compile the technical file:
Lisa Chen - ARENA
Parc de Tréville, 2 allée des Mousquetaires 91078 Bondoufle cedex - France
Signed for and on behalf of: Jumbo-Markt AG
Place : Dietlikon
Date of issue: 2019-11-21
Signee:
COO
lvo Casutt
98|
99
GB

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis