Programming Various Functions - Sharp ER-A160 Bedienungsanleitung

Key operation example
0001
e É
Programming an entry digit limit for
The limit is in effect for REG-mode operation but can be overridden in the MGR mode.
When "0" is set, the operation of the corresponding key is prohibited.
Key operation example
≈î É
8

Programming various functions

5
• Be very careful not to enter a wrong number for the number entry after the first
to enter the number described in the "Procedure".
• You can continue programming until
section. To continue programming, repeat from the first numeric key entry.
Setting the register number
When your store has two or more registers, it is practical to set separate register numbers for their identification.
Ñ 1
Key operation example
Ñ
1
Ñ É
123
Setting the consecutive number
The consecutive number is increased by one each time a receipt is issued.
Ñ 2
Key operation example
Ñ
2
Ñ É
1000
≈
To program "0"
Entry digit limit(0-8)
To program for another key
≈
Register number (one to three digits)
≈
To begin the count from 0001
≈
A number (one to four digits) that is one
less than the desired starting number
≈
Print
From left, ABCD
' , î , r
≈ ' î
,
Print
Entry digit limit
É
key is pressed for the programming described in this
To set the register number "0"
Print
Print
and p keys
r p
or
,
Ñ
Ñ
Ñ
É
key. Be sure
É
É
29